Mastermind Meets The MS500i

[huskihl]

But the 462 is strato. So they are filling the transfer with fresh air and then exhaust first? Head spinning.



Been pondering the same thing. Is opening Ex side first causing the exhaust to push the charge towards the intake side, let the natural amount of charge that gets sucked/short circuited out the exhaust be exhaust gas and not charge, or just allow the quickest flow there first to aid in direction and prevent short circuiting?

No idea.

Yep that’s pretty much my thought. And then I grind them flat and don’t think about it again

 

[Mastermind]

Yep that’s pretty much my thought. And then I grind them flat and don’t think about it again

You and I must be twins.

 

[Wood Chopper]

Have you discovered pornhub?

Not yet.. is it any good? Asking for a friend..


Sent from my iPhone using Tapatalk

 

[Mastermind]

Time for reassembly.

 

[Agent Smith]

Not yet.. is it any good? Asking for a friend..


Sent from my iPhone using Tapatalk

They got jugs and things that go in ports there too

 

[Mastermind]

Not yet.. is it any good? Asking for a friend..


Sent from my iPhone using Tapatalk

Well....when you wanna look at naked people, it's very good.

This forum.....not so much.

 

[TreeLife]

Well....when you wanna look at naked people, it's very good.

This forum.....not so much.

Nekked wimmen folk?! *gasp*

 

[Wood Chopper]

Well....when you wanna look at naked people, it's very good.

This forum.....not so much.

Good. I’ve seen enough air filter pics

Love these porting threads.


Sent from my iPhone using Tapatalk

 

[RI Chevy]

Don't even mention Air Filters anymore please. I'm going blind from Eye Bleach

 

[DND 9000]

Time for reassembly.

Nice work, Randy. I`m looking forward to see how she runs. You know that the saw should be properly recalibrated with the software to get the right tune and performance?

 

[Mastermind]

 

[Mastermind]

Nice work, Randy. I`m looking forward to see how she runs. You know that the saw should be properly recalibrated with the software to get the right tune and performance?

I don't have the ability to do that.

And....that may cause me to avoid this model in the future.

 

[RI Chevy]

Running yet? Vids? Lol

 

[Mastermind]

Running yet? Vids? Lol

3 more yet to assemble.

 

[RI Chevy]

Wow. I was just funnin ya...
Excellent thread here! Thanks for doing this for us... [emoji106]
#Grateful

 

[Shanesaw80]

I don't have the ability to do that.

And....that may cause me to avoid this model in the future.

I would assume that it would calibrate itself, even if it takes a little longer would it not?

If not then that would be a massive draw back to the saw, it’s not like we all work in the same temps and elevation everyday or have dealer support readily available.

 

[Mastermind]

I would assume that it would calibrate itself, even if it takes a little longer would it not?

If not then that would be a massive draw back to the saw, it’s not like we all work in the same temps and elevation everyday or have dealer support readily available.

The only answer I have to that is "Time will tell".

 

[Stump Shot]

You and I must be twins.

 

[Stump Shot]

Nice work, Randy. I`m looking forward to see how she runs. You know that the saw should be properly recalibrated with the software to get the right tune and performance?

There's software available to do this?

 

[Mastermind]

There's software available to do this?

Not in my eBiz......