HUSQVARNA HUSQVARNA THREAD

[Sloughfoot]

I just did one of these not too long ago. Your second picture doesn't work can you post another

Applied the OPE adjustment editor to rotate and it disappeared.

 

[Sloughfoot]

Looks like it is missing 501 41 90-01. Not sure what that little forked pin is for unless it is supposed to be 501 41 90-01, but it looks a bit thin to take on that role, I would expect a thicker pin there.

Yeh, I think that's what it is. I see a fork in the end of the one on the IPL.

 

[hacskaroly]

Here is what I get from the pics:

Missing:
501 41 90-01
501 43 55-01
503 22 20-03

 

[hacskaroly]

I think that's what it is. I see a fork in the end of the one on the IPL.

It might be, but seems kind of small to me, I guess the spring supports it and keeps it from bending when actuating the chain brake.

 

[Sloughfoot]

Making sense now, thanks. Looks like I'm missing what is probably a bolt and nut (501-43-5501). I cut the numbers off, but it looks like the bolt that goes through the taller spring on the other end of the assembly goes through the flag bracket end also. I seeing that right?

 

[Sloughfoot]

Here is what I get from the pics:

Missing:
501 41 90-01
501 43 55-01
503 22 20-03

View attachment 473163

NICE!

 

[Sloughfoot]

That bolt and nut are in place in the advert but weren't sent. What's wrong with people?

 

[singinwoodwackr]

Post in thread 'Husqvarna 2100 air filter cover'
https://opeforum.com/threads/husqvarna-2100-air-filter-cover.33024/post-1683291

Might help

 

[singinwoodwackr]

Looks like it is missing 501 41 90-01. Not sure what that little forked pin is for unless it is supposed to be 501 41 90-01, but it looks a bit thin to take on that role, I would expect a thicker pin there.

The little fork just keeps the spring aligned.

 

[Sloughfoot]

The little fork just keeps the spring aligned.

My IPL doesn't have part descriptions. I assume the bolt the fork goes against isn't proprietary, can just make it work with stainless or galvanized bolt and nylock.

 

[hacskaroly]

The little fork just keeps the spring aligned.

To me it seemed that the fork pictured would not be stout enough, but I guess it is supported by the spring and won't bend.

 

[hacskaroly]

Post in thread 'Husqvarna 2100 air filter cover'
https://opeforum.com/threads/husqvarna-2100-air-filter-cover.33024/post-1683291

Yup, there it is...lol

 

[Sloughfoot]

Appreciate the help, Gentlemen. Anyone got an extra flag or know who I can have fix this?

 

[Sloughfoot]

To me it seemed that the fork pictured would not be stout enough, but I guess it is supported by the spring and won't bend.

Yeh, looks like all it does is keep that end in place.

 

[Shane¹]

@Sloughfoot looks like you got it all figured out. On mine I just used an m6 bolt and nut and used a piece of stainless tube as a bushing. I will try to send you pictures tomorrow. As far as the flag could you just weld a piece of tube into it?

 

[Sloughfoot]

@Sloughfoot looks like you got it all figured out. On mine I just used an m6 bolt and nut and used a piece of stainless tube as a bushing. I will try to send you pictures tomorrow. As far as the flag could you just weld a piece of tube into it

Haven't welded something this tedious very often, but if I can find the right size tube may give it a shot.

 

[president]

It might be, but seems kind of small to me, I guess the spring supports it and keeps it from bending when actuating the chain brake.

T1, it prevents the spring from movement latterly

 

[singinwoodwackr]

Appreciate the help, Gentlemen. Anyone got an extra flag or know who I can have fix this?

Just weld in a section of 3/8” tube.
Let us know how you bend it. I have one to repair

 

[Sloughfoot]

Just weld in a section of 3/8” tube.
Let us know how you bend it. I have one to repair

I've got a little bench top bender that I got 4 or 5 years ago and haven't even set up yet. It should make quick work of this. It's the welding part that I've got mixed emotions about.
I'm thinking a matching diameter of solid rod is the way to go. Size it to the i.d. on the one end and insert it 6" or so.
Have @hacskaroly chrome it.

 

[Junk Meister]

Does a Husqvarna 71K (Demo saw)crank and P/C interchange with Husqvarna 371, ?372? and Jonsered 2171 chainsaws?
Tried a search here and found Nothing. May have worded my query wrong.