HUSQVARNA HUSQVARNA THREAD

[heimannm]

He's looking for a full wrap.

Mark

 

[Woodwackr]

He's looking for a full wrap.

Mark

I Have a couple…will check condition

 

[justoldsaws]

The more hours I put on this 390 the more I like it, such a nice saw to run.
Its like a 372 on steroids.

 

[greystone mountain man]

The more hours I put on this 390 the more I like it, such a nice saw to run.
Its like a 372 on steroids.

View attachment 438692

I've got one I bought new about 20 years ago.its made alot of money in it's life.only thing I've ever done to it is change bars and fuel filters.

 

[Squareground3691]

 

[heimannm]

 

[Squareground3691]

View attachment 439169

View attachment 439170

View attachment 439171

View attachment 439172

View attachment 439173

I bet the cooling fins were working at full capacity .

 

[heimannm]

I believe that was an attempt at a pre-filter so the fins don't get clogged with fines...

Mark

 

[heimannm]

The cylinder cleaned up nicely, now I need the piston assembly, intake and carburetor gaskets, base gasket, and a muffler gasket (there was one on the saw when I took it apart but nothing shows in the IPL).

Looks like my piston choices are ProLine, LRB, Highway, and Meteor or the Dukes coated piston. I'm inclined to go with the Meteor but I am open to other suggestions as well. I can't find anyone that has all the parts I need in one stop.

Mark

 

[Squareground3691]

The cylinder cleaned up nicely, now I need the piston assembly, intake and carburetor gaskets, base gasket, and a muffler gasket (there was one on the saw when I took it apart but nothing shows in the IPL).

Looks like my piston choices are ProLine, LRB, Highway, and Meteor or the Dukes coated piston. I'm inclined to go with the Meteor but I am open to other suggestions as well. I can't find anyone that has all the parts I need in one stop.

Mark

Can’t go wrong with Meteor.

 

[hacskaroly]

I believe that was an attempt at a pre-filter so the fins don't get clogged with fines...

Did it work?

 

[Shane¹]

The cylinder cleaned up nicely, now I need the piston assembly, intake and carburetor gaskets, base gasket, and a muffler gasket (there was one on the saw when I took it apart but nothing shows in the IPL).

Looks like my piston choices are ProLine, LRB, Highway, and Meteor or the Dukes coated piston. I'm inclined to go with the Meteor but I am open to other suggestions as well. I can't find anyone that has all the parts I need in one stop.

Mark

I like the dukes pistons. He has the coated ones and aftermarket gaskets not sure if you want OEM gaskets or not

 

[ErnieG]

Could someone help me with a fitment to a part number?
5018030-01
Its a worm gear but I can't find what it fits .

Thanks
Ernie

 

[Woodslasher]

181, 281, 288

 

[ErnieG]

181, 281, 288

Thats what I was hoping...thank you
Ernie