Husqvarna C83 the best?

[ZERO]

Just played around with a brand new EXL, on the torque monster from the North Woods factory. @Stump Shot

Cut was made on a 5 year bone dry hard wood, these were the chips we pulled. Stock tooth profile, stock raker height, but I did modify the raker profile just to see how we would do.

Just as many VARIABLE rakers on this chain as on my C83/85 set up out of the box.

The tip was bouncing in the hard wood as expected, when pinned down by the dogs, she held steady.

 

[I saw a lot]

In case anyone is interested, HL Supply is having a sale on C83, $349 per roll.

OEM Husqvarna X-Cut Chain 100' Roll, C83 3/8'', .050''

www.hlsproparts.com

 

[farminkarman]

In case anyone is interested, HL Supply is having a sale on C83, $349 per roll.

OEM Husqvarna X-Cut Chain 100' Roll, C83 3/8'', .050''

www.hlsproparts.com

Thanks for the heads up. I had just finished off the last of my roll of C83, so this is perfect timing

 

[Jusgunn3]

That’s the cheapest I have seen it!

 

[Catbuster]

I like it the best out of the box, but to me RSK is a better chain by the time I file it a few times. The baby C goes away over time. I think RSK holds a little bit better edge, and I like Stihl’s chain having a little bit shorter cutter.

 

[Hoser]

I also really like it. Seems to hold an edge good but takes to the file alot nicer than RS.
The factory grind also bore cuts extremely smooth in my experience.
If I can get it priced similar to RS by the case I’ll pick a couple up

 

[Jake Dykstra]

Ap

In case anyone is interested, HL Supply is having a sale on C83, $349 per roll.

OEM Husqvarna X-Cut Chain 100' Roll, C83 3/8'', .050''

www.hlsproparts.com

In case anyone is interested, HL Supply is having a sale on C83, $349 per roll.

OEM Husqvarna X-Cut Chain 100' Roll, C83 3/8'', .050''

www.hlsproparts.com

Damn...sale must be over. Says 549 now

 

[Jusgunn3]

I saw that, did find two rolls of 33RSK for the 3/8 saws. Got a roll of SP33G for .325, hope it cuts well.

 

[Squareground3691]

Ap



Damn...sale must be over. Says 549 now

Baileys has it 299.00

 

[FernGreen]

Do you guys find the x-cut c83 to hold an edge longer than 33 RS?

 

[Hoser]

No it doesn’t. Not a huge difference but enough.

 

[Wilhelm]

I have been getting up to 3 tanks of fuel on round ground Husqvarna X-Cut C85 bucking skidded beech and oak firewood logs with my PS-550!
And it'd still cut I just don't want to force my PS-550 unnecessarily with front handle downward pressure (I do not utilize bucking spikes if I can avoid it!).
One or two file strokes "in the field" usually brings the chain back to amazing performance and then I'd grind it back at home.

I own Stihl RS 3/8" & .325" loops, to me they are mediocre compared to X-Cut.
Not planning on buying any of those ever again!

Yes!
Different application, different cutting style, different preferences - variables plain & simple.

For me full chisel Husqvarna X-Cut is the current king of chainsaw chains.