Husky 162/272--Jonny 630/670 project thread.

[markds2]

View attachment 230743

View attachment 230744

View attachment 230745

View attachment 230746

This help?

WOW!! That is a minty one Joe!

Mines a bit earlier than a 268 of course with 'Made in Sweden' and 'Professional' stickers. Here are the best pics I can find but you will see there are a couple of different ways the yellow stickers are placed.:

 

[Czed]

@Johnmn
Posted these in another thread
For the 266/268/272 o-rings
https://www.ebay.com/itm/Metric-Bun...229129?hash=item2f293b83c9:g:r28AAOSwbP1aZ~VR

 

[Ronie]

@Johnmn
Posted these in another thread
For the 266/268/272 o-rings
https://www.ebay.com/itm/Metric-Bun...229129?hash=item2f293b83c9:g:r28AAOSwbP1aZ~VR

Do these these fit the oil pump or the seal holder?

 

[Czed]

Do these these fit the oil pump or the seal holder?

@Johnmn
I'm at work what are they?

 

[Johnmn]

Do these these fit the oil pump or the seal holder?

It's the same o-ring for the oil pump and the seal holder.

 

[Ronie]

The o rings you posted a link to.

 

[Ronie]

Good to know, I thought the crank side o ring was smaller. Thanks, I'm going to order some.

 

[Ronie]

It's the same o-ring for the oil pump and the seal holder.

Do you know if the 288 uses the same o ring?

 

[Ronie]

It's the same o-ring for the oil pump and the seal holder.

Nevermind, I just saw that Mattyo posted the o ring specs.

 

[Czed]

It's the same o-ring for the oil pump and the seal holder.

I thought he found one i never saw in a 2 series
They were always the same to me.

 

[Johnmn]

 

[zero_sum]

Ooooh, could it be?

 

[Czed]

View attachment 232766 View attachment 232767

Take it out and run it
Life's short enjoy it.

 

[Czed]

Thanks @Spike60 nice wrappy and stickersGot some of my small parts in for my builder saws

 

[Johnmn]

Thanks @Spike60 nice wrappy and stickersView attachment 233847View attachment 233848Got some of my small parts in for my builder sawsView attachment 233850

What o-rings did you order? I haven't ordered any yet but they are in my cart!

 

[Czed]

What o-rings did you order? I haven't ordered any yet but they are in my cart!

The one's you found
Took two day's to get to my door
Fast service.

 

[Spike60]

Thanks @Spike60 nice wrappy and stickersView attachment 233847View attachment 233848Got some of my small parts in for my builder sawsView attachment 233850

Your welcome Dave, and enjoy them in good health!

 

[David Young]

@Spike60

any idea why there is a return line on this 670 carb. Never seen one like this before

 

[Johnmn]

@Spike60

any idea why there is a return line on this 670 carb. Never seen one like this before

David some of the 670's had a recirculating carb. So there is a supply and return line as well as the impulse. I'm not sure if the 625 ever had them and I'm pretty sure the 630's never did.

 

[Johnmn]

What manufacturer cylinder does that 670 have?