how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[cobey]

This is my day....

Had a mishap with a table router.

 

[Workshop]

Hope they're not hurt too bad, buddy.

 

[67L36Driver]

This is my day....
View attachment 48355
Had a mishap with a table router.

Don't stick your hand in there!!!

 

[Workshop]

Clutch pedal went away this morning on my truck. Hydraulic actuated clutch. Hope it's just an oring at the slave cylinder or a cracked line. Have to pull the trans to change the slave cylinder. If it's that, then it will get a new clutch in her, too.

 

[Hedgerow]

Clutch pedal went away this morning on my truck. Hydraulic actuated clutch. Hope it's just an oring at the slave cylinder or a cracked line. Have to pull the trans to change the slave cylinder. If it's that, then it will get a new clutch in her, too.

Keep it fixed up good for me Steve!!
Lol.

 

[Homelite410]

Clutch pedal went away this morning on my truck. Hydraulic actuated clutch. Hope it's just an oring at the slave cylinder or a cracked line. Have to pull the trans to change the slave cylinder. If it's that, then it will get a new clutch in her, too.

Been there done that. I had a hundred thousand miles on the new clutch and the pilot bearing locked up. Needless to say I was faster taking the transmission out the second time. The clutch looked really good but I replaced the slave cylinder anyway.

 

[concretegrazer]

This is my day....
View attachment 48355
Had a mishap with a table router.

Ouch!

 

[cobey]

This is my day....
View attachment 48355
Had a mishap with a table router.

The table router wheels came undone, I fell forward, the part hung up and my fingers were jerked in. Ripped most the tip off my ring finger and cut my pinky up. They did the best to put them back together
They are redesigning the machine I was using today before anyone else uses it.
I am blessed I didn't loose a big part of my hand. It a long time to get my pain meds drove myself home, passed out before I got here, now I'm sitting and getting less pain got pain meds in me.
God is good, tomorrow will be a better day.

 

[Ethan Hamby]

Ouch man.... Routers are hell on fingers.

 

[cobey]

Ouch man.... Routers are hell on fingers.

Yep..... I'm not gonna be predictive for a few days. Was gonna try to get all my saws ready for some work this weekend.
But it ain't happening now

 

[huskihl]

Yep..... I'm not gonna be predictive for a few days. Was gonna try to get all my saws ready for some work this weekend.
But it ain't happening now

Given your situation, you could probably be a lot more predictive than productive, with the medication you're on and all

 

[lumberjackchef]

This is my day....
View attachment 48355
Had a mishap with a table router.

Yikes!

Sent from my N9516 using Tapatalk

 

[Dub11]

Yep..... I'm not gonna be predictive for a few days. Was gonna try to get all my saws ready for some work this weekend.
But it ain't happening now

Ouch on those hands !!!!

 

[Workshop]

Decided not to do the pallet project for kitchen flooring. Read on line to use a sawsall to cut the nails to get them apart. Spent $17 for ten nail cutting blades. Got 2/3 of a pallet done and dull blade. Plus draining 3 batteries. I figured it would take $100 worth of blades to take these apart. Plus time spent cutting and plaining and denailing a thousand planks. And at the speed I move it would be spring before I was ready to put them down. (Wasn't going to happen in my life time) I'm getting everything I need for this flooring project from Lowe's for less than $500. Put the pallets on CL and traded them for an 024 I did.

 

[Ethan Hamby]

My grandparents built a porch and a tree stand with pallet wood I wouldn't have wasted the time lol

 

[67L36Driver]

Decided not to do the pallet project for kitchen flooring. Read on line to use a sawsall to cut the nails to get them apart. Spent $17 for ten nail cutting blades. Got 2/3 of a pallet done and dull blade. Plus draining 3 batteries. I figured it would take $100 worth of blades to take these apart. Plus time spent cutting and plaining and denailing a thousand planks. And at the speed I move it would be spring before I was ready to put them down. (Wasn't going to happen in my life time) I'm getting everything I need for this flooring project from Lowe's for less than $500. Put the pallets on CL and traded them for an 024 I did.

Good trade!!

And, I'm not the type to be thrilled with an 028 but, just saying.

 

[Dub11]

Decided not to do the pallet project for kitchen flooring. Read on line to use a sawsall to cut the nails to get them apart. Spent $17 for ten nail cutting blades. Got 2/3 of a pallet done and dull blade. Plus draining 3 batteries. I figured it would take $100 worth of blades to take these apart. Plus time spent cutting and plaining and denailing a thousand planks. And at the speed I move it would be spring before I was ready to put them down. (Wasn't going to happen in my life time) I'm getting everything I need for this flooring project from Lowe's for less than $500. Put the pallets on CL and traded them for an 024 I did.

Man if your getting 024s for pallets I got some beautiful 5x5 skids made of 1x6 Iam bringing your way.

 

[WKEND LUMBERJAK]

Evening all.

 

[67L36Driver]

Evening Kenneth!

I'm ready to move south. Freakin' cold here on the backside of Missouri.

Our friend Jim is down at the back. VA told him he has stress fractures and osteoporosis. Not good.

 

[WKEND LUMBERJAK]

Evening Kenneth!

I'm ready to move south. Freakin' cold here on the backside of Missouri.

Our friend Jim is down at the back. VA told him he has stress fractures and osteoporosis. Not good.

No it's not.