What's your preferred moisture?After getting into the field, the soybeans were at 7.9%. 30 acres or so out & they moved to a different farm, hopefully those are carrying a bit more moisture.
I'll throw the turkey fryer burner and pan for the oil bath in the truck. I'll have a couple of pans of hot rolls, butter and the makings for hush puppies. What else will people want? I assume most are not eaters of rabbit food. Have to see if I can churn out anything else. I'll try to remember to throw in some paper plates to make cleanup easy. We got a bunch a while back so I will see what I can dig out.Need me to have anything on hand what kinda sides, hardware, that kinda stuff??
Usually we are 101 to 103 thousand
You are probably running more than 5 axles.Usually we are 101 to 103 thousand
We only have 5 axles but TN don't mess with you much on agriculture but we have to watch out in GA.You are probably running more than 5 axles.
In Iowa we can run 90k when the governor issues a decree, usually 60-90 days during harvest but fines revert back to start at 80k if you are over 90k.
I saw 2 different scale jockeys cruising around today.
85k or so is about 1000 bu., no reason to get carried away. I was getting 7.3mpg averaging 86k last week. Fuel isn’t cheap & the truck rides like crap on these chitty roads when it gets up around 90k or more.
There are a few 5 axle setups but a lot of the pots here have 3-4 axles & several of the trucks run pusher/cheater axles.We only have 5 axles but TN don't mess with you much on agriculture but we have to watch out in GA.
We ain't that fancy everything we have is wore out junk but at least it's a large carThere are a few 5 axle setups but a lot of the pots here have 3-4 axles & several of the trucks run pusher/cheater axles.
I got the paper plates and utensils.I'll throw the turkey fryer burner and pan for the oil bath in the truck. I'll have a couple of pans of hot rolls, butter and the makings for hush puppies. What else will people want? I assume most are not eaters of rabbit food. Have to see if I can churn out anything else. I'll try to remember to throw in some paper plates to make cleanup easy. We got a bunch a while back so I will see what I can dig out.
Didn’t you get a 461 awhile back Carl ? Did you find that one a new home ?Morning Midlanders!
Got a MS271 and an 026 from Ben Tuesday.
The 271 is near mint (Ben had three. ) so it went on Markeplace directly.
Spent all day giving the 026 ‘The Dip’. Only needed a new rim sprocket and one screw. Surprising
Next dress the bar and touch up the chain this morning.
The 461 is promised to Hunters Lawn care.Didn’t you get a 461 awhile back Carl ? Did you find that one a new home ?
Just curious if you are moving many saws ?