Grease Monkey Garage

[Steve]

Anybody ever use this as a diff cover sealant?:

Permatex® Gear Oil RTV Gasket Maker, 3 OZ - Permatex®

www.permatex.com

"Because gear oil has friction modifiers that break down normal RTV"

Gonna give it a try because I am adding 1 bottle ah friction modifier.

Ford 10.5" limited limited slip rebuild.

This is all I use anymore. It laughs at gear oil, trans fluid, coolant, anything really.

 

[mainer_in_ak]

Nice! Yep I've used right stuff almost exclusively since 2012 on all sortsa "stuff".

It also has a crazy below zero rating. Something like -60?!

Though not fuel resistant, I've sealed up many chainsaws with it as well.

 

[Yukon Stihl]

This is all I use anymore. It laughs at gear oil, trans fluid, coolant, anything really.

View attachment 464105

Same stuff I use
Use some Vasoline under the cap to keep it from curing if you don’t use it every day
You waste a bit to clear the Vasoline but a solid tube is a big waste

 

[mainer_in_ak]

Woah, free hat and a kind note in the box.

Finished up. Gotta wait 24 hrs before I can add gear oil.

 

[stretch5881]

A free cap is always good.

 

[FergusonTO35]

I'm guessing you will need to refer to the 30 minute procedure

View attachment 463687View attachment 463688

Redline, that worked perfectly. Thanks again!