Check my fingers.

[Mastermind]

I can see where a cylinder burr would be nice for the ends of these. I used two cut off wheels stacked, as Mike suggested for the tips. I broke the plating with a diamond round burr and finished them with an egg shaped carbide.

Randy i cant even fathom doing these in ten minutes. You should video that.

I use these burrs. They dull quick, but they move some metal.

http://www.ebay.com/itm/380981914979?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

[jmssaws]

I use a round double cut but I've only found them in 1\4" shank so I chuck them up and turn them down for a foredome handpiece. 1\4 are cheaper than 1\8 most of the time so I do that a bunch.

 

[Deets066]

I use a round double cut but I've only found them in 1\4" shank so I chuck them up and turn them down for a foredome handpiece. 1\4 are cheaper than 1\8 most of the time so I do that a bunch.

The actuall burr would be larger in diameter also, I could see how that would help in fingers and some other areas.

 

[Mastermind]

I have a Foredom handpiece that runs 1/4, 3/16, and 1/8 collets Jason. I'll find a link for you.

 

[skippy]

Is cc specialties still the products to buy for port work ?

 

[Mastermind]

I use their MC182 handpieces.

 

[skippy]

I use their MC182 handpieces.

I was pondering buy a kit from them . any suggestions

 

[Mastermind]

For 3/32 and 1/8 burrs I use this.....

http://www.ebay.com/itm/FOREDOM-HAN...229727?hash=item3381d0149f:g:oYsAAMXQSnVRbg7y

Then for larger burrs....this one.

http://www.ebay.com/itm/rle-FOREDOM...610833?hash=item5d5f95cad1:g:c8EAAOSw1ZBUrHbC

 

[Mastermind]

I was pondering buy a kit from them . any suggestions

I'd just use the handpiece.....get everything else other places.

 

[jmssaws]

I buy grinders from Rio grande and burrs and other crap also. Pretty good deals from them.
Cc specialties is the only right angle to get,I've tried the cheap ones and they don't last a month.

 

[Redfin]

Fwiw Chris, the harbor freight flex shaft grinder fits the 182 ra. The straight hand piece on that flex shaft sucks and is a bit large.

I took the flex shaft apart and oiled it well. Its much smoother now. Its due for a cleaning and relube.

 

[Mastermind]

Warning......finger pic coming up.







Hahahahaha

 

[Redfin]

Warning......finger pic coming up.





View attachment 708

Hahahahaha

Is it brokded?

 

[Keith Gandy]

Is cc specialties still the products to buy for port work ?

http://pages.ebay.com/link/?nav=item.view&id=111608723887&alt=web
thats worked well for me skippy but there isnt another choice on the cc right angle but dollar up and get it

 

[skippy]

Thanks guys
How about bits

 

[drf256]

I just bought the 3/32 collet for my right angle handpiece from CC.

My ass still hurts from the price.

But....

You can use cheap 3mm grinding stones made by those with slanty eyes with the collet. I can get a 50 pack of small stones for $20 on Amazon. Pays for itself.

 

[drf256]

Keith,

I miss your old avatar.

Sincerely, just a beautiful photo of mother and child I always liked.

 

[Keith Gandy]

This is a good one that not too aggressive to learn with in the exhaust and intake. Its double cut and with a light touch wont remove too much at once. A buckeye single cut alumahog will remove lots at one time if left in one place with too much pressure. http://pages.ebay.com/link/?nav=item.view&id=161405059014&alt=web

 

[mdavlee]

I buy several of the bits from CC. The alumnihog and the blue ceramic.

 

[drf256]

I buy several of the bits from CC. The alumnihog and the blue ceramic.

I bought my L handed bur there. Only place I could find it.