Chainsaws and Lifelong Friendships Raffle Winners Annouced and Prize Selection Thread

[jacob j.]

FedEx showed up with this little beauty! Even got the full wrap, never had one. Thank you so much @jacob j. Can't wait to try it out.
Now to decide what size bar? I'll swap my 365SP 20" over for now, but do I go longer or shorter? Was already thinking a 24" before the raffle as I have chains from the MS660 25". I'm guessing this is set up for 3/8" .050, guessing I need to look at the rim?

It currently has a 3/8" rim on it now, so whichever gauge you want to use is fine. It would be plenty comfortable with either a 20" or 25".

I wouldn't go any bigger than a 28".

 

[Czed]

@Icepick69
Thanks man

 

[Czed]

I guess my bars arrived
Last sat
Was the estimate never heard
From the winner's lol

 

[SOS Ridgerider]

The prize I was so lucky to be able to pick arrived today from @NCFarmboy
It’s in great shape and started right up. Thank you again!!

 

[I saw a lot]

It currently has a 3/8" rim on it now, so whichever gauge you want to use is fine. It would be plenty comfortable with either a 20" or 25".

I wouldn't go any bigger than a 28".

Thinking of a 24" due to the fact I have chains from the 660 and my 365sp already has a 20" plus can share the bar. Looking forward to doing some cutting. Thanks again Jacob, you are the best.

 

[huskyboy]

Thinking of a 24" due to the fact I have chains from the 660 and my 365sp already has a 20" plus can share the bar. Looking forward to doing some cutting. Thanks again Jacob, you are the best.

24” reduced weight bar balances nice (like a total/tsumura for example).

 

[Wilhelm]

My prize pick arrived safe and sound today, thank You @psuiewalsh !

 

[Homelitehack]

I guess my bars arrived
Last sat
Was the estimate never heard
From the winner's lol

I got mine! Thanks again.

 

[Dub11]

Special Thanks is in order to @NCFarmboy ! Not only did he proved a mint saw, but also a new 20" Windsor bar and new loop of Oregon chain!

I really cant imagine this thing has made more than a couple cuts.

 

[I saw a lot]

24” reduced weight bar balances nice (like a total/tsumura for example).

I was thinking this one http://www.hlsproparts.com/product-p/vt3u-0q62hv.htm
but they are out of stock. May need to keep looking around.

 

[Dub11]

I was thinking this one http://www.hlsproparts.com/product-p/vt3u-0q62hv.htm
but they are out of stock. May need to keep looking around.

Look up Nate @fordf150 and his website he will be able to hook you up with the light weight bar you need.

 

[Jon1212]

I was thinking this one http://www.hlsproparts.com/product-p/vt3u-0q62hv.htm
but they are out of stock. May need to keep looking around.

Here you go.
https://m.ebay.com/itm/24-TsuMura-L...d=p2385738.m4383.l4275.c10&_mwBanner=1&_rdt=1

Look up Nate @fordf150 and his website he will be able to hook you up with the light weight bar you need.

I looked on his site, and didn't see any listed.

 

[Clemsonfor]

Special Thanks is in order to @NCFarmboy ! Not only did he proved a mint saw, but also a new 20" Windsor bar and new loop of Oregon chain!
View attachment 132578
I really cant imagine this thing has made more than a couple cuts.

Role of paper or fabric?

Sent from my SM-G900V using Tapatalk

 

[GCJenks204]

Here you go.
https://m.ebay.com/itm/24-TsuMura-L...d=p2385738.m4383.l4275.c10&_mwBanner=1&_rdt=1

I looked on his site, and didn't see any listed.

Jon, you just made my day. I get to correct you about a bar fittment... The bar you linked is a K095 and I am pretty sure she got a 562 not a 560 so would need a D009 fittment. I do agree that it looks like Nate is out of stock at the moment.

 

[GCJenks204]

I checked @fordf150 Nate's old site layout and I found a couple of options.

For the price I might try one of these:

https://performance-outdoor-equipme...s/oregon-versacut-24-3-8-050-84dl-240vxlhd009

Or for the Tsumura:
https://performance-outdoor-equipme...tsumura-459fk4-24-3-8-050-84dl-reduced-weight

 

[Jon1212]

Jon, you just made my day. I get to correct you about a bar fittment... The bar you linked is a K095 and I am pretty sure she got a 562 not a 560 so would need a D009 fittment. I do agree that it looks like Nate is out of stock at the moment.

You're welcome, Gary. For some reason, I had it stuck in my big ol' melon that the 562 is a small mount.

 

[Jon1212]

@04ultra has these.
http://www.woodcuttersgaragellc.com/product-page/total-lite-tough-2

 

[I saw a lot]

I checked @fordf150 Nate's old site layout and I found a couple of options.

For the price I might try one of these:

https://performance-outdoor-equipme...s/oregon-versacut-24-3-8-050-84dl-240vxlhd009

Or for the Tsumura:
https://performance-outdoor-equipme...tsumura-459fk4-24-3-8-050-84dl-reduced-weight

Is Performance Outdoor equipment his site? I like the idea support members. This will put a 16" on my 026, 20" on the 365 special & 32" on the MS660 (have a 25" as well).
Thanks again for all the input.

 

[huskihl]

Is Performance Outdoor equipment his site? I like the idea support members. This will put a 16" on my 026, 20" on the 365 special & 32" on the MS660 (have a 25" as well).
Thanks again for all the input.

Yes it is

 

[GCJenks204]

Is Performance Outdoor equipment his site? I like the idea support members. This will put a 16" on my 026, 20" on the 365 special & 32" on the MS660 (have a 25" as well).
Thanks again for all the input.

Nate is a great guy to deal with. I’ve bought stuff from him 4 or 5 times and we always find the best way to get it to me. He doesn’t get on here as much anymore but if you have a chance give a call at the shop often has other stuff that isn’t in the web too.