Any Chinese chainsaw and chinese parts discussion

[Ronie]

I built 5 saws with 268 and 272 open windowed pistons
Not the strongest running saws i have but by far the easiest starting
They are like pulling on a 40/50cc saw and run fine
Compression in the 170s
It must be the mass of the lighter weight pistons.
I wonder who makes closed port 266/268 pistons anymore
I'll build another one.

Hutzl and Meteor have them.

Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 from China manufacturer - Farmertec

Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 offered by China manufacturer Farmertec. Buy Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 directly with low price and high quality.

www.farmertec.com

Pardon Our Interruption...

 

[Czed]

Hutzl and Meteor have them.

Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 from China manufacturer - Farmertec

Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 offered by China manufacturer Farmertec. Buy Husqvarna 268 Chainsaw 50MM Piston Kit WT Ring Pin Circlip OEM# 503 44 83-71 directly with low price and high quality.

www.farmertec.com

Pardon Our Interruption...

That's the farmertec pistons i used in my saws
I'd like to find a full circle 266/268 piston that's lighter than a 372 piston.

 

[Ronie]

That's the farmertec pistons i used in my saws
I'd like to find a full circle 266/268 piston that's lighter than a 372 piston.

I have a windowed one but I don't think it's lighter than the 372 piston. I'll weigh it if you want.

 

[Ronie]

OEM 372



Meteor closed sided 268



OEM windowed 268

 

[Czed]

OEM 372

View attachment 413258

Meteor closed sided 268

View attachment 413259

OEM windowed 268

View attachment 413260

Thanks

 

[Ronie]

Thanks

You're welcome, I wish I had another Farmertec one to weigh, it would be the lightest of the bunch.

 

[Hulpio]

Looks like easy dyno to me:

Drehmoment prüfstand Motor tester Prüfstand mit großer Kapazität für die mechanische Automatisierung industrie - AliExpress 1420

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

 

[Czed]

2511 clone

8inch Mini Gas Chain Saw Machine 25.4cc 10inch Wood Cutting Gasoline Chainsaw Very Light Industrial Grade Oem Customizable - Buy Petrol Chain Saw 25.4cc Kettensage Cs2500 scie A Chaine Motosserra A Gasolina motores Gasolina Motosega A Catena Motosser

8inch Mini Gas Chain Saw Machine 25.4cc 10inch Wood Cutting Gasoline Chainsaw Very Light Industrial Grade Oem Customizable - Buy Petrol Chain Saw 25.4cc Kettensage Cs2500 scie A Chaine Motosserra A Gasolina motores Gasolina Motosega A Catena Motosserra A Gasolina 25.4cc 8inch Mini Gas Chain Saw...

x.alibaba.com

They Blurred the serial number

 

[Ronie]

2511 clone

8inch Mini Gas Chain Saw Machine 25.4cc 10inch Wood Cutting Gasoline Chainsaw Very Light Industrial Grade Oem Customizable - Buy Petrol Chain Saw 25.4cc Kettensage Cs2500 scie A Chaine Motosserra A Gasolina motores Gasolina Motosega A Catena Motosser

8inch Mini Gas Chain Saw Machine 25.4cc 10inch Wood Cutting Gasoline Chainsaw Very Light Industrial Grade Oem Customizable - Buy Petrol Chain Saw 25.4cc Kettensage Cs2500 scie A Chaine Motosserra A Gasolina motores Gasolina Motosega A Catena Motosserra A Gasolina 25.4cc 8inch Mini Gas Chain Saw...

x.alibaba.com

View attachment 413363View attachment 413364
They Blurred the serial number View attachment 413365View attachment 413366

I had one of those and it cut pretty good, I gave it to my brother in law a couple of years ago.

 

[Ronie]

The $200 Farmmac arrived today but the bar and chain didn't. I think I'll swap out the tank and top cover for black ones and paint the clutch cover white. I noticed that they had the saw alone for $250 and the saw + bar and chain for $200 when I bought it but now they have changed it around, someone must have screwed up on the listing.

 

[Hulpio]

Looks like easy dyno to me:

Drehmoment prüfstand Motor tester Prüfstand mit großer Kapazität für die mechanische Automatisierung industrie - AliExpress 1420

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

This actually a real deal if description is from product they are selling. Normally first picture shows customer what he is going to get if he buys the item.
Customer service tried to tell be that it will be only torque sensor and sensor wiring. BUT at the same time their add is like in attached pic.
I warned the guy that you will get a lot of disputes if you ship anything less than items in that pic.

 

[dirter]

2511 clone

Yep, I’ve been keeping these a secret from here because I don’t want to come off like I’m advertising but I do have some of these and they do seem worthy. I love the dual bar studs. The muffler is bigger, especially at the port. The passage is probably 60% bigger at the exhaust port. The starter is a spring loaded EZ pull but the sprung slack is not ridiculously long. Maybe 2”. From 5’ away these look like they would be nearly identical to the Echo but there are subtle differences. The clutch and muffler covers will not interchange. Nor will the starter. The clutch is the same though and I have some 1/4” and some 3/8”. I was trying to talk huskihl to port one of them a few months ago but I think he’s been busy. These run pretty good but no comparison to the real 2511T he did for my wife last year.

 

[dirter]

More

 

[Czed]

I had one of those and it cut pretty good, I gave it to my brother in law a couple of years ago.

I think i ended up buying 5 of these zenoah clones they were 70.00 shipped and every time i'd buy one my friends would buy it from me

This one i bought a couple of year's ago i loaned it to my brother and his 4 kid's
They ran it with the clutch on
And burned the cover
But it and all the rest of them still run perfectly
I tore the top av mount and just put a decking screw through it.
Good running little saws as strong as any brand I've run before.

 

[Czed]

Yep, I’ve been keeping these a secret from here because I don’t want to come off like I’m advertising but I do have some of these and they do seem worthy. I love the dual bar studs. The muffler is bigger, especially at the port. The passage is probably 60% bigger at the exhaust port. The starter is a spring loaded EZ pull but the sprung slack is not ridiculously long. Maybe 2”. From 5’ away these look like they would be nearly identical to the Echo but there are subtle differences. The clutch and muffler covers will not interchange. Nor will the starter. The clutch is the same though and I have some 1/4” and some 3/8”. I was trying to talk huskihl to port one of them a few months ago but I think he’s been busy. These run pretty good but no comparison to the real 2511T he did for my wife last year.

It's not a secret from 1.4 billion in china
How much are they shipped?

 

[Czed]

More

I wanted to make sure they were 2511 sized
Are they comparable to oem power wise?

 

[Czed]

The $200 Farmmac arrived today but the bar and chain didn't. I think I'll swap out the tank and top cover for black ones and paint the clutch cover white. I noticed that they had the saw alone for $250 and the saw + bar and chain for $200 when I bought it but now they have changed it around, someone must have screwed up on the listing.




View attachment 413372View attachment 413373

I sent my friend that link when they were 199.00 and he bought a few
He gave me one for fixing his saws for him.
I haven't run it yet but i like the tools and spike kit it comes with
Otherwise it's virtually identical to the holzfforma 365/372
Even the sharp case halve seam behind the trigger i had to sand it down exactly like the holzfforma's
And the advertisement lied it had the same squarish handle as everything else china saw.
Sweden my ass

 

[Czed]

Very safe looking tracked crawler/tiller

https://www.aliexpress.com/item/3256803098712818.html

 

[dirter]

I wanted to make sure they were 2511 sized
Are they comparable to oem power wise?

I think it’s real close to OEM power but it’s been a few years since our Echos were stock. I had my saw done by west coast muscle saw and my wife’s was done by huskihl. I’m selling the KNK for $220 including bar and chain. I had them flown over when I got them so my cost is higher.

 

[Hulpio]

G5800 was surprisingly good. Tested it properly for the first time.
Checked everything. Workmanship has been good and could not find anything to complain about except that unfinished piston top. They compensated it by saving discount coupon to my account.

So I Iinstalled 325-8T sprocket, 18" bar and new x-cut chain. Got about 9500rpm when splitting birch bar buried 15" in wood. This is without base gasket squish being somewhere 1-1.2mm. Had to measure twice since seemed so big.
I did also grind those 3 pcs 30mm long and 5mm wide "scoops" to muffler. It is loud but not too loud.
Engine starts with first or second pull - cold or hot.
Carb setting was done pretty much according to instruction manual. That manual is good. Does have pictures and enough safety related instructions.
Generally well worth 30$ and 115$ freight.