Any Chinese chainsaw and chinese parts discussion

[Czed]

Koza xia is the seller i contacted we text's through the aliexpress message system from when i placed the order until it arrived i like that.
He calls me friend so i asked if he had any damaged saws and what his best price is for a 660 lol

 

[Czed]

If you buy from them your money is held by aliexpress until you receive and inspect your purchase and you confirm it i like that better than ebay.

 

[Stihl working Hard]

Cant get this freakin phone to link but type in chainsaw on ebay and it's on the first page 88.99 free shipping same saw without start assist it looks like.View attachment 53209

The chain on backwards is a nice touch

 

[Stihl working Hard]

Koza xia is the seller i contacted we text's through the aliexpress message system from when i placed the order until it arrived i like that.
He calls me friend so i asked if he had any damaged saws and what his best price is for a 660 lol

Is that for an aftermarket 660 Dave

 

[Czed]

The chain on backwards is a nice touch

Milling.

 

[Czed]

Is that for an aftermarket 660 Dave

Sadly yes.

 

[Stihl working Hard]

Sadly yes.

I know of one 660 aftermarket saw over here Matt owns it had a couple of issues with the carby put on a genuine one

 

[Czed]

I know of one 660 aftermarket saw over here Matt owns it had a couple of issues with the carby put on a genuine one

If i have a problem i will tell you just trying to give an honest review of these copy saws projects no issues at all so far just as hard on gas as any of the real deals.

 

[Czed]

I use the first saw as a test bed for cylinder mods at five gallons i tore it down for more porting it's coming along great I've done all i can to this cylinder i don't have a way to machine the base or squish but I'm very happy with the saw check out the red armor dripping from everything when i tore it down lol

 

[Czed]

I deleted the base gasket and am going to work on the timing next my big bore huztl hasn't come in yet curious to see if it's as good as the 50mm I've heard good things about them.

 

[Terry Syd]

I can probably cobble up enough parts to build you a modded 'Zama' (Chinese copy), for you to try on the Big Bore.

It may be that the Chinese have done a bit of work on their carbs and there may not be any real advantage. On the other hand, if the modded carb makes the saw a more user friendly work saw, then you might try some carb mods, either on the stock carb or on a more easily modded Chinese copy. Finding a carb with an auxiliary jet for the low speed circuit would probably be the easiest to work with.

Let me know if you want me to throw something together, send a PM with your address.

 

[Czed]

I can probably cobble up enough parts to build you a modded 'Zama' (Chinese copy), for you to try on the Big Bore.

It may be that the Chinese have done a bit of work on their carbs and there may not be any real advantage. On the other hand, if the modded carb makes the saw a more user friendly work saw, then you might try some carb mods, either on the stock carb or on a more easily modded Chinese copy. Finding a carb with an auxiliary jet for the low speed circuit would probably be the easiest to work with.

Let me know if you want me to throw something together, send a PM with your address.

Thanks for the offer but I've got some micro jewelers bits on order these carbs have been good once adjusted i haven't had to retune i will try to mod these thank you for you're offer I've been reading polemans thread i like to tinker lol
I have the basics down should be fun to mod these.

 

[Czed]

Out of four saws i just had to change the spring in the one carb.

 

[Czed]

Next up i'm working on timing i have to get a small enough file might not mess with timing still deciding.
Edit i left the timing alone.

 

[Czed]

You never know what you will get from huztl my big bore came in looks nice it's on the left it has a different finish in the cylinder but has no issues with sharp edges or unfinished ports when i get time i will port it. some of this stuff i didn't order the orange pieces for the intake floor i didn't.

 

[Mattyo]

looks like hyway plating on the cylinder on the left... the goldish stuff

 

[Czed]

looks like hyway plating on the cylinder on the left... the goldish stuff

You're right i forgot about those they are about 100.00 if memory serves i will check this one was 25.00

 

[Czed]

109.99 to be excact for the hyway.

 

[Terry Syd]

this one was 25.00

You paid $25 for a Big Bore kit! Heck, $25 wouldn't get you a pair of rings in Oz.

 

[Motorhead]

Like your enthusiasm Czed,Makes me want to start a new project