Any Chinese chainsaw and chinese parts discussion

[nbbt]

I'd be tempted on a top handle if over 30cc to under40cc for a good deal. Right now I'm only seeing several 25cc ones shipped for about $85-$90 plus tax sometimes.

If ya see the proper site and timing . . . I just might not be looking in the proper place this morning.

I don't really need more saws, but a fresh top handle could find some usage here.

 

[ammoaddict]

The

Is this it?
52CC Gas Chainsaw 20 Inch Gas Powered Chainsaw 2 Stroke Handheld Petrol Gasoline Chain Saw Cordless Wood Cutting Machine for Cutting Wood Outdoor Home Farm Use https://a.co/d/awfXtnD

I've been having a lot of trouble with this site lately, not quoting correctly and not uploading pics.

 

[Spike60]

Yeah, that's it. Scrolling through the saws on the bottom will bring you to the Husky clones.

 

[Hulpio]

The

Is this it?
52CC Gas Chainsaw 20 Inch Gas Powered Chainsaw 2 Stroke Handheld Petrol Gasoline Chain Saw Cordless Wood Cutting Machine for Cutting Wood Outdoor Home Farm Use https://a.co/d/awfXtnD

Nope. It is https://www.farmertec.com/58cc-JonC...-Without-Saw-Chain-and-Guide-Bar-p720640.html

 

[ammoaddict]

Nope. It is https://www.farmertec.com/58cc-JonC...-Without-Saw-Chain-and-Guide-Bar-p720640.html

I know, it quoted the wrong post.

 

[Czed]

OK, was just over on Amazon. Found another supplier of 365/372 clones. Kind of hard to figure out the brand. Zoomed up one of the pics and it looked like HNSAVQUA on the started decal. Let that roll off your tongue.

The 365 is priced $109 and the "Orange72" at $115. Same supplier makes a bunch of those generic 52 and 58cc saws in various colors. A "Red2" 52cc saw is $45. And it looks like they all come with Bars and chains at those prices. Only common word with these saws is "Powful". Abrievation for powerful?

I can't get my phone to copy a link, so I'll leave that to you more tech savvy guys to do. Have fun!

I just got this one back i loaned it out last year it's one of those i bought 6 year's ago

I put a cut down for a popup farmertec 268 piston in it it still has 170# comp.
And trueblue 4.5 rope with a hyway pullstart
Haven't touched it since.
I have so many saws laying around i loan these out all the time if i don't have time to fix somebody's saws
Or family and friends.
Often i get new chains back with them
Got a new Husqvarna 24" bar and stihl rs chain combo last year back with the loaner
It was worth more than the saw.

 

[Hulpio]

My cousin "loaned" his wife to a local taxi driver. Came back with silicones and humble attitude in two years.

 

[Czed]

97.48 shipped for 2 neotec 24" and a 28" bar and chain combo

I stopped by my local Stihl dealer checking for a 24" lw bar for a customer it was 183.64 after tax
A loop of stihl full chisel was 50.88 after 6% state tax
234.52 for one stihl bar and chain.
It was 137.04 cheaper for me to get 3 bar's and chains.
Now will 3 china laminate bar's and chains outlast one stihl bar and chain
I don't know of care because
I'm not paying 234.52 for 1 damn bar.

 

[ammoaddict]

97.48 shipped for 2 neotec 24" and a 28" bar and chain comboView attachment 412168
View attachment 412169
I stopped by my local Stihl dealer checking for a 24" lw bar for a customer it was 183.64 after tax
A loop of stihl full chisel was 50.88 after 6% state tax
234.52 for one stihl bar and chain.
It was 137.04 cheaper for me to get 3 bar's and chains.
Now will 3 china laminate bar's and chains outlast one stihl bar and chain
I don't know of care because
I'm not paying 234.52 for 1 damn bar.

I'm with you brother. That stihl stuff is way overpriced. That's a great deal on those neotecs.

 

[Czed]

I'm with you brother. That stihl stuff is way overpriced. That's a great deal on those neotecs.

Stihl's always been high going back to the 80's when I started cutting
I'm guessing 10-20% more to run stihl than husqvarna or jonsereds
We went with Husqvarna because of a good dealer.

 

[Spike60]

I just got this one back i loaned it out last year it's one of those i bought 6 year's ago
View attachment 412162
I put a cut down for a popup farmertec 268 piston in it it still has 170# comp.
And trueblue 4.5 rope with a hyway pullstart
Haven't touched it since.
I have so many saws laying around i loan these out all the time if i don't have time to fix somebody's saws
Or family and friends.
Often i get new chains back with them
Got a new Husqvarna 24" bar and stihl rs chain combo last year back with the loaner
It was worth more than the saw.

Thanks buddy. That'll likely cost me some curiosity money.

 

[Czed]

Thanks buddy. That'll likely cost me some curiosity money.

I'm selling off a few saws
I finally found a 62cc whatever it is
61,262,268,272 under the hood

62cc ce zugelassene Kettensäge gasbetrieb ene Hoch leistungs leistung max 6200 - AliExpress 1420

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

I might get one of these
This is where the first 365/372 saws came from.

 

[Fleethirte]

97.48 shipped for 2 neotec 24" and a 28" bar and chain comboView attachment 412168
View attachment 412169
I stopped by my local Stihl dealer checking for a 24" lw bar for a customer it was 183.64 after tax
A loop of stihl full chisel was 50.88 after 6% state tax
234.52 for one stihl bar and chain.
It was 137.04 cheaper for me to get 3 bar's and chains.
Now will 3 china laminate bar's and chains outlast one stihl bar and chain
I don't know of care because
I'm not paying 234.52 for 1 damn bar.

And the stihl bars are made in Brazil….

 

[ammoaddict]

97.48 shipped for 2 neotec 24" and a 28" bar and chain comboView attachment 412168
View attachment 412169
I stopped by my local Stihl dealer checking for a 24" lw bar for a customer it was 183.64 after tax
A loop of stihl full chisel was 50.88 after 6% state tax
234.52 for one stihl bar and chain.
It was 137.04 cheaper for me to get 3 bar's and chains.
Now will 3 china laminate bar's and chains outlast one stihl bar and chain
I don't know of care because
I'm not paying 234.52 for 1 damn bar.

I started to get a neotec 24 or 28 but all I saw was .058. All my chain is .050 so I passed. I looked for a deal in a 36" D009 mount for a future saw. Didn't find any killer deals. I have an archer 36" stihl mount, I might just get one of the 10 dollar adapters and use it. I know I can't keep talking myself out of that g395 forever.

 

[bogieboy]

I'd be tempted on a top handle if over 30cc to under40cc for a good deal. Right now I'm only seeing several 25cc ones shipped for about $85-$90 plus tax sometimes.

If ya see the proper site and timing . . . I just might not be looking in the proper place this morning.

I don't really need more saws, but a fresh top handle could find some usage here.

Thats exactly what i am looking for as well... would love to find a good deal on a ms200t clone, but they seem to be completely sold out or almost 300...

 

[ammoaddict]

Thats exactly what i am looking for as well... would love to find a good deal on a ms200t clone, but they seem to be completely sold out or almost 300...

I have a Chinese 25cc top handle. They have more power than you think they would. I was pleasantly surprised with mine. I think is was $83 delivered from Amazon.

 

[Czed]

I started to get a neotec 24 or 28 but all I saw was .058. All my chain is .050 so I passed. I looked for a deal in a 36" D009 mount for a future saw. Didn't find any killer deals. I have an archer 36" stihl mount, I might just get one of the 10 dollar adapters and use it. I know I can't keep talking myself out of that g395 forever.

That 28" .63 gauge neotec bar was hard to pass up I don't run .63 but I'll get a few loops
84dl .58 is 11.00 a loop shipped on eBay

 

[Spike60]

I'm selling off a few saws
I finally found a 62cc whatever it is
61,262,268,272 under the hood

62cc ce zugelassene Kettensäge gasbetrieb ene Hoch leistungs leistung max 6200 - AliExpress 1420

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

I might get one of these
This is where the first 365/372 saws came from.

That 660 clone with the green top would would be just the thing for St. Patrick's day tomorrow.

 

[Maintenance Chief]

97.48 shipped for 2 neotec 24" and a 28" bar and chain comboView attachment 412168
View attachment 412169
I stopped by my local Stihl dealer checking for a 24" lw bar for a customer it was 183.64 after tax
A loop of stihl full chisel was 50.88 after 6% state tax
234.52 for one stihl bar and chain.
It was 137.04 cheaper for me to get 3 bar's and chains.
Now will 3 china laminate bar's and chains outlast one stihl bar and chain
I don't know of care because
I'm not paying 234.52 for 1 damn bar.

I always wait for a sale or deal from one of the guys on here for stihl bars. I have to admit that the stihl es light bar is the finest/ lightest bar I've ever used. Only the old Windsor speed tip is as durable and the weight is profound.
The bulk of Chinese made bars I've used wear out way to quickly for me.
I'll be interested to see how the new crop of contenders are in the wear department?

 

[Ketchup]

A lot of the new stuff is just rebranded Tsumura. That’s what that Neotec looks like.