What's your favorite 70cc saw?

[hseII]

Sugis cost more

Not when you buy from HeBro Hippy Bar Barron. [emoji6]

 

[hseII]

Or 04Ultra, that guy.

 

[jmssaws]

Or 04Ultra, that guy.

How much is a 24"?

 

[Jon1212]

How much is a 24"?

$88

 

[junkman]

I have a nice running 044 hybrid here and a 28 and 32" 404 bars.
Want to see it in hardwood?

I run full skip and almost no hook on my sideplate ,it keeps the rpms up in anything in my area good with that setup ,once the cedar or fir is down ,the hybrid is like a light saber bucking the limbs off .Works real well ,and does not weigh a lot .
Am curious how the same setup works in your area ,

 

[junkman]

Here is one of my cutters

 

[Chris Zautner]

I don't care what they say. If I have my 25" buried the chain is very dry at the end of cuts. I couldn't imagine a 28" on it. Same with the 441

My stihl ms 41 rcm That I added a 3/4 wrap to will oil or atleast keep the bar cooler with the 28 with .063 guage and will make a 20 really hot with .050 guage

 

[mdavlee]

Or 04Ultra, that guy.

I like when he sends a box with New Glarus beer in it with saw parts.

 

[hseII]

I run full skip and almost no hook on my sideplate ,it keeps the rpms up in anything in my area good with that setup ,once the cedar or fir is down ,the hybrid is like a light saber bucking the limbs off .Works real well ,and does not weigh a lot .
Am curious how the same setup works in your area ,

Send me one & I'll report back.

 

[hseII]

I like when he sends a box with New Glarus beer in it with saw parts.

I like muh Sushi Shirt.

 

[T.Roller]

I may just need to try a .063 gauge bar and chain

 

[jmssaws]

I run full skip and almost no hook on my sideplate ,it keeps the rpms up in anything in my area good with that setup ,once the cedar or fir is down ,the hybrid is like a light saber bucking the limbs off .Works real well ,and does not weigh a lot .
Am curious how the same setup works in your area ,

I don't have any 404 skip so 32" full comp is what it's getting.
The chain is pretty mean but I'll cram it in the ground first.

 

[huskihl]

I don't have any 404 skip so 32" full comp is what it's getting.
The chain is pretty mean but I'll cram it in the ground first.

That's what @Definitive Dave does when his powerhead won't pull his race chain

 

[huskihl]

44, 46, 66 all oil fine if you increase the ramp angle on the pump. Not like the Exxon Valdez 394, but good enough

 

[Deets066]

Here is one of my cutters
View attachment 49139

That's a really nice cutter and I can see why you hold good rpm.

 

[Stihlkillstrees]

I may just need to try a .063 gauge bar and chain

63 gauge might change your life

 

[junkman]

.404 .063 oils even better yet

 

[T.Roller]

My 36" and 42" are .063 but my shorter ones are .050

 

[junkman]

I may just need to try a .063 gauge bar and chain

When i was milling with a 28 inch bar and .050 ,i had to run an aux oiler because the bar was getting real hot ,when i went to .063 and .404 ,i can run without the aux oiler and a 32 inch bar and it runs cool still .

 

[Stihlkillstrees]

63 gauge is also more rigid than 50 gauge, harder to throw, except when you have loops put together and someone used 58 gauge drive links...