What's on your bench?

[RI Chevy]

Gotta be good for .25 of a second in the cut. Lol
AND the screw won't.....
NAH. I won't say it. [emoji23]

I used a clamp from an 044 on my 346 and it worked nicely. Little smaller than the hose clamp. But if it works![emoji106][emoji106]

 

[PA Dan]

Gotta be good for .25 of a second in the cut. Lol
AND the screw won't.....
NAH. I won't say it. [emoji23]

My thoughts exactly!

 

[RI Chevy]

It will make it run bettah! Lol

 

[beaglebriar]

Looks perfectly acceptable to me .

Agreed.

I really like a 385/390 clamp on those but as long as it isn't rubbing on anything it should work.

 

[decableguy2000]

I really like a 385/390 clamp on those but as long as it isn't rubbing on anything it should work.

Me too.
537 42 28-01 partion wall
505 28 33-02 clamp from 385/390

 

[T.Roller]

Gotta be good for .25 of a second in the cut. Lol
AND the screw won't.....
NAH. I won't say it. [emoji23]

Hahahaha

 

[Car wash guy]

I put 2 tanks through it before the rain ran me off. The tune stayed true no funny idle or anything I'm gonna call it fixed. Plus it was free lol.

Sent from my Lenovo TB-X103F using Tapatalk

 

[beaglebriar]

I put 2 tanks through it before the rain ran me off. The tune stayed true no funny idle or anything I'm gonna call it fixed. Plus it was free lol.

Sent from my Lenovo TB-X103F using Tapatalk

How do you like it?

 

[Car wash guy]

I was pleasantly surprised. I've got it tuned in the wood. Still bubbling when I pull it out of the cut.I need a tach really bad lol.i got a 55 husky that driller ported for me. It's stronger than that saw. The only spare bar I had chain for was a 24 inch small mount husky. Today I was cutting butt ends of poplar to heavy for me to lift so I had to noodle them.The saw will noodle with a 24 burried. It holds good rpm all the way. Now mind you poplar is like cutting butter but I was impressed with it

Sent from my Lenovo TB-X103F using Tapatalk

 

[beaglebriar]

I was pleasantly surprised. I've got it tuned in the wood. Still bubbling when I pull it out of the cut.I need a tach really bad lol.i got a 55 husky that driller ported for me. It's stronger than that saw. The only spare bar I had chain for was a 24 inch small mount husky. Today I was cutting butt ends of poplar to heavy for me to lift so I had to noodle them.The saw will noodle with a 24 burried. It holds good rpm all the way. Now mind you poplar is like cutting butter but I was impressed with it

Sent from my Lenovo TB-X103F using Tapatalk

They're truly great saws. If I had a two saw plan 359 would be in the running.

 

[Dub11]

They're truly great saws. If I had a two saw plan 359 would be in the running.

I know when I first ran mine it was one of those "where has this been all my life!" moments

 

[beaglebriar]

I know when I first ran mine it was one of those "where has this been all my life!" moments

Same here almost kept the last one...If I come across a real nice orange one it'll probably stay.

 

[tickbitintn]

They respond very well to porting.
Good running saws....
I wish there was an easy way to convert them to a "normal" boot type intake setup...

Sent from my XT1635-01 using Tapatalk

 

[tickbitintn]

They pull the crap out of a 20" in just about any kind of wood....

Sent from my XT1635-01 using Tapatalk

 

[RI Chevy]

Is this 359 a 59cc saw?

 

[huskyboy]

Is this 359 a 59cc saw?

Yes

 

[Tpagel]

Cleaning 357 parts

Sent from my SM-J327V using Tapatalk

 

[tickbitintn]

Dibs on the ML....


Sent from my XT1635-01 using Tapatalk

 

[RI Chevy]

Yes

TY sir. So the Stihl equivalent is a 361?
Thanks Mason.
I am finally starting to get the Hooskie lingo down. Lol

 

[RI Chevy]

Cleaning 357 parts

Sent from my SM-J327V using Tapatalk

Nice work shop Travis! [emoji106]