What's on your bench?

[dustinwilt68]

Nice saw Kevin!

 

[huskihl]

Looks like brand new. Are you doing port work, or is there something wrong with it?

Porting it

 

[RI Chevy]

You're really pumping out some nice stuff Kevin! [emoji106]

 

[beaglebriar]

Jonsered 930...

 

[Tor R]

242 year 89




Well, one of my spare 44 pump has to sacrifice a part...already done so I got a spare 242 oil pump now

For later......



Not sure if it will work or not, but I got a plan for my 246 crank (the one the flywheel bearing spun on), I got another crank who is the same but with a boken PTO axel, plan to contact a company who swap conrod bearings....

 

[dustinwilt68]

So when do you want my 246 sent over to be looked over?lol

 

[Tor R]

So when do you want my 246 sent over to be looked over?lol

the way you maintance your saws I doubt they need any service for awhile

 

[dustinwilt68]

Soon as I get the MOFO 262 together today, then the 246 is up next, it cuts out in the cut and I can only get it to run 14,200. Should turn 15,000+.

 

[Cut4fun]

Just couldnt pass them up.

Back from the morning run picking up a 351 and 350. 351 he said dont start and thinks just fuel line. 350 runs and cuts good he said.
Few bumps, bruises and missing parts. Like cover clip bar nut and muffler bolt. Just hope the muffler bolt missing on 351 didnt take out the cylinder threads on the way out.

Didnt really want the 350 but to get the 351 had to buy both.

 

[beaglebriar]

Just couldnt pass them up.

Back from the morning run picking up a 351 and 350. 351 he said dont start and thinks just fuel line. 350 runs and cuts good he said.
Few bumps, bruises and missing parts. Like cover clip bar nut and muffler bolt. Just hope the muffler bolt missing on 351 didnt take out the cylinder threads on the way out.

Didnt really want the 350 but to get the 351 had to buy both.

View attachment 115314 View attachment 115315 View attachment 115316

350 should be an easy sell. Plenty of guys looking for them.

 

[PA Dan]

View attachment 115103 View attachment 115104 View attachment 115105

Ya buddy I like what I see on your bench for a change![emoji23]

 

[Cut4fun]

350 should be an easy sell. Plenty of guys looking for them.

Yep.

I just aint into the plastic case is why. But I know the brace mod etc to do.

 

[chipper1]

Just couldnt pass them up.

Back from the morning run picking up a 351 and 350. 351 he said dont start and thinks just fuel line. 350 runs and cuts good he said.
Few bumps, bruises and missing parts. Like cover clip bar nut and muffler bolt. Just hope the muffler bolt missing on 351 didnt take out the cylinder threads on the way out.

Didnt really want the 350 but to get the 351 had to buy both.

View attachment 115314 View attachment 115315 View attachment 115316

Looks like the nascar version, like black walnut their highly valuable .
Why the concern about the threads when a 346 P&C is so cheap. I've got a 351 in the basement on the floor, not the bench lol. It's a runner, but I'd rather swap it out, or just sell it and get the real deal.

 

[Tor R]

Soon as I get the MOFO 262 together today, then the 246 is up next, it cuts out in the cut and I can only get it to run 14,200. Should turn 15,000+.

something is chooking her, close 15k wot is where mine is tuned, none of my 242/246's like to run to fat.

 

[beaglebriar]

something is chooking her, close 15k wot is where mine is tuned, none of my 242/246's like to run to fat.

Coil?

 

[Tor R]

Coil?

carb, coil, wire would be my first checks.
Dustin own one 242 also so he has the chance to swap parts, if it was me I would borrow the coil first.

 

[dustinwilt68]

I will definitely try that first, got the hda87 rebuilt and put on the MOFO 262 and she fired right up, gotta advance the timing yet and do a few little tweaks to get the full potential but I love it already! Hoping to get to the 246 by Monday, I will definitely try the coil first, gonna put new fuel line and filter in and check the tank vent also.

 

[Cut4fun]

Looks like the nascar version, like black walnut their highly valuable .
Why the concern about the threads when a 346 P&C is so cheap. I've got a 351 in the basement on the floor, not the bench lol. It's a runner, but I'd rather swap it out, or just sell it and get the real deal.

I dont worry about running 346 topends myself. They are just used for cutting wood.
Just soon keep them right for new owners.

Unless top needs replaced. Then will put whatever. Wood never complained yet.

 

[rattler]

Ya buddy I like what I see on your bench for a change![emoji23]

Me too Dan. I like these t though

 

[p61 western]

Me too Dan. I like these t though
View attachment 115399 View attachment 115400 View attachment 115401

What was used on the side of that wrap? I have one that will need some of that love.