What's on your bench?

[drf256]

Back to bench. You guys can figure this out. No need fo splainin’.

 

[drf256]

 

[drf256]

Of course
View attachment 110383

As well as booger marks on the case
View attachment 110387

And ........
It wouldn’t be complete without the allways present crooked baseView attachment 110389
View attachment 110388



Of course its out side to side ......... why wouldn’t it be ?

Omg Kev.

 

[paragonbuilder]

View attachment 110398 View attachment 110399 View attachment 110400 View attachment 110401 View attachment 110402

It’s about time! This should get interesting!![emoji41]


Sent from my iPhone using Tapatalk

 

[bigbadbob]

My first huskys to tear into ($75 CL find)
I’m a Stihl guy but couldn’t say no!
365 special- needs a top end and some TLC (top cover, tank repair or replace, smalls etc)
61- running, needs a chain brake band and some smalls
254 - will run with fuel poured into the carb - needs fuel system work and a clutch cover/chain brake

View attachment 110370 View attachment 110371

That 254 is a great saw. Might surprize you,,

 

[Roadfxr]

You’d never guess in a million years
View attachment 110368 View attachment 110369

I’d recognize that garbage all day everyday. At least he was consistent on his lack giving a damn...

 

[SOS Ridgerider]

You’d never guess in a million years
View attachment 110368 View attachment 110369

Ummmmm
That should be obvious Sir, as should the “who did it” question

With enough practice, a pile of monkey crap could look like cutting edge art

Please allow me to digress, pictures of said swuish
View attachment 110372 View attachment 110373 View attachment 110374

Strap-On did Work that’s just unbelievable.

Sanded that band with some rotary sander. Not sure that jug is worth fixin, but it would be interesting to find out.

Any sanding marks on the base?

Of course
View attachment 110383

As well as booger marks on the case
View attachment 110387

And ........
It wouldn’t be complete without the allways present crooked baseView attachment 110389
View attachment 110388



Of course its out side to side ......... why wouldn’t it be ?

Stuff like this makes me cringe now. Unbelievable how many saws he’s screwed up.

The amount of work you two have done to help others out is humbling. Especially for me, since I have received help on several saws.

 

[paragonbuilder]

Stuff like this makes me cringe now. Unbelievable how many saws he’s screwed up.

The amount of work you two have done to help others out is humbling. Especially for me, since I have received help on several saws.

Yeah you may have gotten the worst of everyone... [emoji35]


Sent from my iPhone using Tapatalk

 

[Moparmyway]

Belt sander bandit strikes again.

Need parts Kevin?

The owner is taking care of getting me the replacement parts, but I thank you Joe. Your willingness to help is incredible, I appreciate you and consider myself lucky to have you as a friend !

 

[SOS Ridgerider]

Yeah you may have gotten the worst of everyone... [emoji35]


Sent from my iPhone using Tapatalk

I don’t know if I got it the worst or not, but I must be up there. The positive side of it, for me, is that Al and especially Kevin have helped me get them running and performing properly again.
I’ll quote Kevin in the post above. I consider myself lucky to call these guys my friends.

 

[Tpagel]

Is that an 024 that is going to gain cc and quads?
Cool project.
Run what you brung?

Sent from my SM-J327V using Tapatalk

 

[mikerudder]

My first huskys to tear into ($75 CL find)
I’m a Stihl guy but couldn’t say no!
365 special- needs a top end and some TLC (top cover, tank repair or replace, smalls etc)
61- running, needs a chain brake band and some smalls
254 - will run with fuel poured into the carb - needs fuel system work and a clutch cover/chain brake

View attachment 110370 View attachment 110371

If anyone has parts that would help me get these together, let me know!

 

[Glock37]

If anyone has parts that would help me get these together, let me know!

Tear them down clean and see what you need

Im doing 3 right now a 046 044 038 mag ll full tear downs blast powder repair assembly and give them back to cust all in about 3 months

 

[Johnmn]

@mikerudder you probably don't want that 254 anyhow I would just send it to me and I'll properly take care of it!

 

[beaglebriar]

Grinding on the 394.

 

[beaglebriar]

..

 

[Canadian farm boy]

Grinding on the 394.

..

Wowza! Nice grinding DJ. Looks awesome

 

[beaglebriar]

Wowza! Nice grinding DJ. Looks awesome

Thanks Mike. Just hope it runs worth a chit. Lol

 

[mikerudder]

@mikerudder you probably don't want that 254 anyhow I would just send it to me and I'll properly take care of it!

Maybe if you have something of interest!

 

[rattler]

That is some purty grinding and don't worry she will run.