What's on your bench?

[Tor R]

Summer chainsaw finished, got a few new parts….case, fuel tank, top cover, handlebar, start cover, brake flag, oil pump, clutch, boot hda1999, etc etc.
Light ported & MM

 

[singinwoodwackr]

Must be basket case 500i week
The tree won.
New handle ordered. After scraping a few layers of crud off...weird bashed in section below the oil cap...which was crushed.
Gonna strip it all down but not splitting the case to look for any other damage.
At least I was able to straiten the bar
Half hr or so just to chisel out the oiler from the black concrete.

 

[singinwoodwackr]

Waiting on a handle now...
From...

 

[Maintenance Chief]

Waiting on a handle now...View attachment 482888View attachment 482889View attachment 482890
From...
View attachment 482891View attachment 482893

If you have a heat gun or hair blow dryer with a low setting and hit your jbweld just after pouring it in you can get the bubbles to rise out ,most times.

 

[singinwoodwackr]

If you have a heat gun or hair blow dryer with a low setting and hit your jbweld just after pouring it in you can get the bubbles to rise out ,most times.

Did that, but, this is Marine Tex which seems to flow a little better with heat than JB. I also didn’t really care how it looked…the owner sure won’t, lol

 

[Vintage Engine Repairs]

Had some customers saws In - Finished up a Makita 9010 and an 064 and have a 2101 and 281 still to go!

 

[farminkarman]

A nice Dolmar 7900 for a local tree killer. This came to me with an AM big bore top end. It had over .090” squish clearance and ran about as good as an 025 Stihl. I put on an OEM top end and did all the mods.

 

[Fords1791]

Stihl 064, flea bay special

 

[pbillyi69]

im trying to find a working electronic ignition for a stihl 045 av super

 

[Shane¹]

im trying to find a working electronic ignition for a stihl 045 av super

Sem or Bosch?

 

[singinwoodwackr]

Sem or Bosch?

Working, lol

 

[Outback]

I have a rough 045 super I've been thinking about tearing down and parting out, but I haven't cause I hate tearing apart a runner. I know that they're hens teeth so what's an ignition worth to ya or maybe a whole saw?