What's on your bench?

[JoeDirt]

So..... you named your saw?

I don't usually name anything but I bought it cheap after the previous owner ran ir over and "crushed" it with a skid steer.

 

[davidwyby]

Helga (the horrible) for the ported one and Bertha for the stock one

 

[Sagebrush33]

I don't usually name anything but I bought it cheap after the previous owner ran ir over and "crushed" it with a skid steer.

I was just commenting because of a different thread. Nothin to do with you friend.
They tried to name my saw Jeefus....

 

[merc_man]

How could I ever forget a guy who likes Mini-Macs? I mean, c'mon, yer like bigfoot or something!

Just like to test my paciance. Nothung like have to pull the motor a few times for something simple lol

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Playin with stickers today.

Sent from my SM-G950W using Tapatalk

 

[Maintenance Chief]

I was just commenting because of a different thread. Nothin to do with you friend.
They tried to name my saw Jeefus....

Tried!? Im pretty sure that I voted. But it wasn't for Jeffus.

 

[RI Chevy]

Husqvarna 576xp locked up solid, I was intrigued as to what was going on, I didn't expect this.... View attachment 297776 View attachment 297777 View attachment 297778

Let's call it FUNKINBROKEN

 

[RI Chevy]

Sorry to hear @WillG

 

[WillG]

Sorry to hear @WillG

Thanks Jeff.

Sent from my E6910 using Tapatalk

 

[WillG]

Getting some stuff done this afternoon after work.

Hosed off the Murray. Delivering it Monday after work.

Checked out a 362XP Special that he says dies after a while and won't restart until it sits a bit. Did the basic checks which were good. Tossed out the Torch plug that was in it and replaced it with a NGK. Put my inline spark checker on it and let it run a while. Make some noodles and cuts with it and it ran ok. Gonna make some more cuts with it tomorrow and see if it acts up. All I can really do at the moment.

Ryobi BP42 got a new carb, fuel lines, purge bulb, fuel filter, air filter and new plug and now runs good.

Sent from my E6910 using Tapatalk

 

[RI Chevy]

Bad coil on the 362XP?

 

[WillG]

Bad coil on the 362XP?

That's what it seems like. Need to make it act up before I condemn it though. Could have even been the Torch plug.

Sent from my E6910 using Tapatalk

 

[M2theB]

Dolmar 9000 going back together now

 

[M2theB]

Muffler got some love too.

 

[M2theB]

A little more before heading in to dinner

 

[RI Chevy]

Where is the extra port on the muffler?

 

[av8or3]

Worked all day on this. Runs good and will look good sitting on the shelf with the 041 I just got. Put some new skins on it. Wish I had a nicer badge

 

[Saw Collector]

How could I ever forget a guy who likes Mini-Macs? I mean, c'mon, yer like bigfoot or something!

I like them too.

This one has a rebuilt engine and is fixing to get sand blasted, primed and painted. Mini Mac 6.

 

[decableguy2000]

Help a friend out with a boat in a box issue. Rebuilding a few carbs for his 115 Johnson.

really need a boat mechanic to pm me, I need basic settings on the idle needle. It has that silly tamper resistant pentalobe screw head on it.

 

[Bigmac]

View attachment 297879 View attachment 297880 View attachment 297881 Worked all day on this. Runs good and will look good sitting on the shelf with the 041 I just got. Put some new skins on it. Wish I had a nicer badge

https://www.ebay.com/itm/352095399776





https://www.ebay.com/itm/124495760005
a couple options