What's on your bench?

[Lcfd1124]

Can i have one? I promise I'll take good care of it lol

Haha. I think I'll hang on to them and pass on to my children.

 

[Lcfd1124]

My son is about to grow out of his saw and will need a bigger one.

 

[Agent Smith]

No doubt! He'll appreciate getting such a nice saw one day

 

[Wilhelm]

View attachment 240762

That's cool!

Patent it.

2 661' that are less than 3 months old straight gassed yesterday. Tree man sold them to me for $100 each. Doesnt have time to wait on them to be repaired

YOU SUCK!

 

[Agent Smith]

View attachment 240762

Thats for the saws that have reverse. eerbody knows that

 

[WillG]

Reassembled and reinstalled carb on 357, followed @tree monkey video on HDA199 carb, needles set at 1.25 to start. Gonna see if she'll make smoke tomorrow afternoon. Ordered a 20" VersaCut bar for her which will be here by next weekend. Scored one for $40 with free shipping on eBay!

 

[RI Chevy]

Are all Hooskies females???
Lmao

 

[a. palmer jr.]

I have two of the newer plastic Homelite XLs, the small ones which I'm trying to make one good one out of. The first one had so many fuel and vacuum lines on it that I don't think I could ever remember how it went back together, second one not so bad. I'm going to use the best parts from both and use the carb. from the second one and stick it together the simplest way possible and hope I can get it to run...These newer ones have no exterior pulse lines to run the oiler so I have to get the feed from the carb.

 

[M2theB]

Got this one for a song. Runs pretty well as is. And good compression. As seen has some cleaning. Soft goods and rings is my hope. I’ve got very little experience with a T handle

 

[WillG]

Are all Hooskies females???
Lmao

I guess so lol

 

[RI Chevy]

LOL. Just funnin ya Will...

 

[JoeDirt]

View attachment 241074 View attachment 241075 Reassembled and reinstalled carb on 357, followed @tree monkey video on HDA199 carb, needles set at 1.25 to start. Gonna see if she'll make smoke tomorrow afternoon. Ordered a 20" VersaCut bar for her which will be here by next weekend. Scored one for $40 with free shipping on eBay!

Just put a 20 inch VersaCut on my 359 today!

 

[JohnnyBlade]

359 report. Upper transfers r done. So stock was 123 after a reading with the covers off. I had said 125. So either way i left secondary port(exhaust side) alone. Primary side starts at 118 and full cracks to 120. Widening/ extending / directing to flush with stock intake. While the same design as my 2159, 2159 starts at 127 and has 24 degrees of blow down. This 359 starts at 118 and has 15 degrees of blow down. Polished up caps. Time for the intake. Still undecided.....We shall see what happens........

 

[Bigmac]

Finally decided to tear in my sp81, did a pressure/ vac test and found my leakCylinder and piston are in excellent shape, got to order some parts now!

 

[Wilhelm]

Are all Hooskies females???
Lmao

All chainsaws better are, otherwise it'd be weird with them porters sticking their spiny things into them.

 

[JohnnyBlade]

Went back in the uppers to do some fine tuning. Better who know? Prettier yes! Took intake to 81 1/2. Widened and squared floor, faded back to stock roof. Loaned out my 4" grinder otherwise i would of Mickey Moused dis bitxh!

 

[PA Dan]

Went back in the uppers to do some fine tuning. Better who know? Prettier yes! Took intake to 81 1/2. Widened and squared floor, faded back to stock roof. Loaned out my 4" grinder otherwise i would of Mickey Moused dis bitxh! View attachment 241150View attachment 241151View attachment 241152 View attachment 241154

Looking great brother!

 

[JohnnyBlade]

Looking great brother!

Thanks Dan! Time consuming for sure. But when u get a good one its all worth it! This one scares me a lil cuz i ventured off my numbers from my 2159. But never ventured never gained i guess. Hell 40-50$ and ill be back to grinding a new head lol! Wait i might have.......nevermind just rough figured older saws like more blow down newer saws like less. This is right in the middle at 15 degrees. Thats what im going with!

 

[PA Dan]

Thanks Dan! Time consuming for sure. But when u get a good one its all worth it! This one scares me a lil cuz i ventured off my numbers from my 2159. But never ventured never gained i guess. Hell 40-50$ and ill be back to grinding a new head lol! Wait i might have.......nevermind just rough figured older saws like more blow down newer saws like less. This is right in the middle at 15 degrees. Thats what im going with!

I think your going to be very happy with the results!

 

[JohnnyBlade]

I think your going to be very happy with the results!

Tomorrow assembly! Thats the fun part