What's on your bench?

[beaglebriar]

Put this parts saw I bought back to how they come from factory. Not my choice for 54cc but a local will like 22" I reckon.

New rubber av's, tensioner, clutch drum bearing, impulse line, fuel line and filter. Different clutch cover. Removed inside tube from muffler. What I remember off the top of my head.

Before as bought for parts.

After testing.
Still need to put rope in the recoil

View attachment 89125 View attachment 89126 View attachment 89127 View attachment 89128

I've passed up a few of these at farm auctions. Are they a good running saw?

 

[Cut4fun]

Yep, 54cc and 60cc versions and built like a 034 036 IMO

 

[Cut4fun]

Open port design.

 

[beaglebriar]

Good to know. They always go cheap, could be a fun project.

 

[Brewz]

Chinese 070 being full converted to 090 with aftermarket top end, Hyway piston and rings, OEM 6 shoe clutch and new clutch drum
Ported it today, replacing all the flat blade screwdriver screws with T-27 screws, advanced the timing and cant wait to get it running.
I have taken it to a point and will run it, then slowly develop it into a speed saw with pipe.
See what breaks and make it stronger

 

[Angelr]

Hoy no hay tiempo para motosierras, para ver cómo va esta tuerca de 50mm, creo que arreglará el comercio del sábado

 

[Big1066ih]

Haven't had time to get my bb JMS 6421 to @huskihl yet, thought I check er out before I cut more with it...

 

[huskihl]

Haven't had time to get my bb JMS 6421 to @huskihl yet, thought I check er out before I cut more with it...View attachment 89516

Sumpin don't look right.

I have another one to put a bb kit on. You should send it

 

[Big1066ih]

Sumpin don't look right.

I have another one to put a bb kit on. You should send it

I'll get it out this week

 

[Czed]

Chinese 070 being full converted to 090 with aftermarket top end, Hyway piston and rings, OEM 6 shoe clutch and new clutch drum
Ported it today, replacing all the flat blade screwdriver screws with T-27 screws, advanced the timing and cant wait to get it running.
I have taken it to a point and will run it, then slowly develop it into a speed saw with pipe.
See what breaks and make it stronger

View attachment 89459

View attachment 89460

View attachment 89461

How are you liking the 070 several Guy's are talking about getting them.

 

[cobey]

Fixed an 041 today
Thanks to @lehman live edge slab
For the choke switch
She's a runner

 

[Czed]

@Stump Shot used one of those 272 pistons and ring in my bigbore today in my 365/372 .
Runs great good power and torque.
Oem wristpin bearing all china otherwise build.

 

[Stump Shot]

@Stump Shot used one of those 272 pistons and ring in my bigbore today in my 365/372View attachment 89529 View attachment 89530 View attachment 89531 View attachment 89532 .
Runs great good power and torque.
Oem wristpin bearing all china otherwise build.

 

[Brewz]

Tb

How are you liking the 070 several Guy's are talking about getting them.

They are white knuckle saws with no AV but are really good for the money.
I wouldn't get one for firewood over a 660.
Good for milling or converting to 090 so you can start it and make small children cry

 

[Angelr]

Bueno, una motosierra hoy en mis manos. Yo no soy un profesional, ni siquiera sé lo que estoy haciendo, pero he visto y leído muchos de sus puestos, ahora voy a tratar de suavizar y mejorar la mezcla de flujo del carretero a las transferencias , Estoy haciendo el cilindro montado, y salto una vez que termino con él fuera [ATTACH = full] 89579 [/ ATTACH] [ATTACH = full] 89580 [/ ATTACH]

 

[Angelr]

Escucho tus comentarios, no dudes en criticar mi trabajo, es realmente lo que quiero entender mis errores

 

[Angelr]

 

[beaglebriar]

View attachment 89582 View attachment 89583

Las bajadas se ven muy bien. Me gusta cómo se equiparó el caso. No lo veo muy a menudo. Ampliar el escape a 65/70 por ciento de la perforación y limpiar los defectos de colada en la toma y tendrás una sierra de funcionamiento agradable.

 

[Angelr]

[QUOTE = "beaglebriar, post: 512336, member: 377"] Las bajadas se ven muy bien. Me gusta cómo se equiparó el caso. No lo veo muy a menudo. Ampliar el escape un 65/70 por ciento de la perforación y limpiar los defectos de colada en la toma y las tendencias una sierra de funcionamiento agradable. [/ QUOTE]
OK thanks for the advice

 

[Angelr]

Bueno, este lado creo que se verá así