What's on your bench?

[bigbadbob]

Put a brake flag on my 2071, I did a 2171 a while ago, an interesting observation, after doing both, the new brake flags wont work unless you bend the little metal arm for the brake, the brake flag wont clear the saw case otherwise,, must have been some changes some time. I know that the 2071 did not have a bent arm as I got the saw new. I bit of a pain in the butt. Here is a picture, I marked the tight clearance areas . The arm is inside the flag. Now gonna put new seals in a 066.

 

[Stackowood]

The old cobbled up parts washer came OFF my bench and I put together this new one with a utility sink, 12V pump, and 3-gallon bucket for the cleaning solution.

 

[Czed]

View attachment 53949 View attachment 53950


The old cobbled up parts washer came OFF my bench and I put together this new one with a utility sink, 12V pump, and 3-gallon bucket for the cleaning solution.

Good idea i like to take my anger out with a pressure washer when it's warm outside on a filthy saw.

 

[Czed]

I'm doing some freebie 180 stihls what adjustable carbs will fit i forgot.

 

[Chainsaw Jim]

I'm doing some freebie 180 stihls what adjustable carbs will fit i forgot.View attachment 53951

I put an HD-12 on mine.

 

[Czed]

I'm doing some porting on my 4+ year old echo 590 been very happy with it but it's down to 120 figures i would rering it at least check out what a saw looks like with a diet of nothing but 40/1 red armor since new.

 

[Czed]

I'm going to miss that grill box when i put the grill together it's the perfect workbench.

 

[dall]

I'm going to miss that grill box when i put the grill together it's the perfect workbench.

you can replace it with a washer and dryer

 

[p61 western]

Apparently possums.
View attachment 53851

Nice p41 you have on the shelf there.

 

[Czed]

you can replace it with a washer and dryer

Lawsuit pending i can't talk any further.

 

[Czed]

Here's a hl supply golf 600p piston all you guys hate.
I've used many golf pistons over the years.

 

[cease232]

you can replace it with a washer and dryer

Makes a great razor chain workbench.


Sent from my iPhone using Tapatalk Pro

 

[Czed]

Makes a great razor chain workbench.


Sent from my iPhone using Tapatalk Pro

Razer

 

[cease232]

Ah, my bad. Must be why I don't get those 40% gains.


Sent from my iPhone using Tapatalk Pro

 

[Czed]

Ah, my bad. Must be why I don't get those 40% gains.


Sent from my iPhone using Tapatalk Pro

I square ground one skip tooth chain with a file and it was nice on a 288 lasted maybe twenty minutes until i hit an electric fence insulator back to round filing for me.

 

[bigbadbob]

Here is the other freebie,,660 number 2, new piston seals 064 muffler, it was a pain as it needed some small spacers on the lower screws had to grind down some small nuts,,have a muffler coming, lots of scrounged parts, its the one from the left hand side in the pic, fired after 3 pulls, a little tune and she is good. Must be time for a miller,,,
BBB

 

[TJ the Chainsaw Mechanic]

Currently got a husqy 55 on the bench needing fuel system work. And waiting on a carb for an MS180C.

 

[Czed]

Here is the other freebie,,660 number 2, new piston seals 064 muffler, it was a pain as it needed some small spacers on the lower screws had to grind down some small nuts,,have a muffler coming, lots of scrounged parts, its the one from the left hand side in the pic, fired after 3 pulls, a little tune and she is good. Must be time for a miller,,,
BBB
View attachment 54021 View attachment 54022 View attachment 54023

That turned out nice wish every saw had wraps like that.

 

[bigbadbob]

Here's a hl supply golf 600p piston all you guys hate.
I've used many golf pistons over the years.View attachment 54017

I had a golf here a little while ago that I put in a saw 10 years ago, the pin came out and left a small divot in the ex port but was not bad enough to not reuse..
BBB

 

[Czed]

I had a golf here a little while ago that I put in a saw 10 years ago, the pin came out and left a small divot in the ex port but was bad enough to not reuse..
BBBo

It was like 6.00 at Christmas lol i bought two.