What's on your bench?

[bigbadbob]

Gonna run it against my 353 and shinny 488 just for the heck of it.

That will be interesting, I have a 353 and 350, 353 seems to be a very nice saw.
BBB

 

[Cut4fun]

Another firewood cutter that prefers the @Definitive Dave CCC afm caps.

Did a muffler mod on the afm muffler I ordered and new b+c.

 

[drf256]

The Christmas 262. Still needs finishing touches.

 

[Tor R]

Where did u purchase that buddy? Thanks

I bought the set in one Norwegian shop, several other shops who sell them here.
http://www.biltema.no/no/Bil---MC/V...r/Demonteringsverktoy-2000019463/?artId=20353

We need to translate so we can find one ebay shop who sell them

 

[beaglebriar]

That will be interesting, I have a 353 and 350, 353 seems to be a very nice saw.
BBB

I ported my 353 and it pulls a 18" 3/8 bc pretty well.

 

[Mastermind]

I've got a oil tank smoker on my bench. Well.....it's outside. It's what I'm working on at any rate. Pictures later.

 

[Czed]

Finally found two alpina 438s great compression just need kits and lines should make good limbing saws.

 

[bigbadbob]

I ported my 353 and it pulls a 18" 3/8 bc pretty well.

Mine has non epa piston (meteor) MM and widened ex port,,no base gasket, a little screamer.
18in .325,, one day I may learn how to port,,, 350 has the same,, not quite as good,, maybe needs a few tanks thru it.
BBB

 

[bigbadbob]

I've got a oil tank smoker on my bench. Well.....it's outside. It's what I'm working on at any rate. Pictures later.

Gonna port it??? LOL
BBB

 

[bigbadbob]

Well here is what I acquired over the summer/fall I will get some of them going this winter.
BBB

 

[Frank bierce]

Well here is what I acquired over the summer/fall I will get some of them going this winter.
BBB
View attachment 41495

Those will make some nice projects!!!

 

[Chris Zautner]

One of those 066/660's would make a nice project. Nice score.

 

[Tor R]

Well here is what I acquired over the summer/fall I will get some of them going this winter.
BBB
View attachment 41495

I see lots of pure orange ones, what models do you have as winter projects there?

 

[exSW]

Finally found two alpina 438s great compression just need kits and lines should make good limbing saws.

Pics

 

[bigbadbob]

I see lots of pure orange ones, what models do you have as winter projects there?

288 181 357 353 395 2x066 044 and others. Both 066 are scored,, I did score 4 new stihl oem pistons earlier this year.
Here is what I was doing this am on a 12mm 044. I guess once the bearing went she sucked a lot of air!! The muffler is also toast, looks to have been loose on the saw for a long time.. Both sides of piston scored,, slant fin cylinder will clean up. You wonder what the operator of the saw would hear as that bearing was gone for a while,,,,PTO side.
BBB

 

[Edwad]

288 181 357 353 395 2x066 044 and others. Both 066 are scored,, I did score 4 new stihl oem pistons earlier this year.
Here is what I was doing this am on a 12mm 044. I guess once the bearing went she sucked a lot of air!! The muffler is also toast, looks to have been loose on the saw for a long time.. Both sides of piston scored,, slant fin cylinder will clean up. You wonder what the operator of the saw would hear as that bearing was gone for a while,,,,PTO side.
BBB
View attachment 41512

Nice to see ya Bob.

 

[Czed]

Soon as i figure out how to do pics i just have a cell phone.

 

[dall]

that is all i use to post pics czed

 

[Czed]

Is there a certain program or app everybody uses.

 

[Frank bierce]

No...just hit upload file, next to
Post reply. Then it will generally allow you to take a photo, or pick a photo from your library.