What's on your bench?

[lehman live edge slab]

I'd say a regular 272 would be more desirable. But the way they reengineered them. Not practical to turn into a firewood machine. That's fine though. I have a couple doorways I need to cut in a foundation wall. This will save me a rental fee




Steven

I have a ts350 for the same reason, needed to cut my steps up at our old house and some sidewalks. Bought a blown 350 off eBay for 45$ and put the 5$ garage sale 08s chainsaw powerhead in it. Have had it for 10 years or so and it’s paid for itself probably 15-20 times by now.

 

[1Snowcat]

Crackin a set of 562xp cases.View attachment 360065

Where does a person get a puller like that? Pretty nice looking design

 

[farminkarman]

Where does a person get a puller like that? Pretty nice looking design

It’s a Husqvarna shop tool. I think I got this one from HL Supply, but here is the info:

 

[Partner]

Doesn't look self-made ;-)

 

[farminkarman]

Got a minty 350 on the bench this morning. This one couldn’t have had more than a tank or two run through it. The open port jug will be replaced with a 346xp ne top end.

 

[Partner]

Last in line to check for the first time Partner 650, the starter is borrowed from S55 ;-)

 

[Partner]

The engine growled but in a moment it got wet on the spark plug. Second try tomorrow

 

[huskihl]

Fat bottom girls they make the rockin’ world go ‘round

 

[farminkarman]

Fat bottom girls they make the rockin’ world go ‘round

View attachment 360411 View attachment 360412 View attachment 360413

So is it a 425 or 475?

 

[farminkarman]

So is it a 425 or 475?

I guess after doing a quick search it looks like a 425 with the lack of a decomp on the fly side.

 

[huskihl]

So is it a 425 or 475?

425.
A lot like a 365 special inside

 

[Stevetheboatguy]

Well........ Was trying to help a guy out and I found some 262 goodies.

So this......



Will be getting these and a few more goodies once I hear back from a friend. And if he doesn't have what I need..... Maybe it will get a V stack and green wenie



Ohh my this came out of nowhere and fast.



Steven

 

[farminkarman]

425.
A lot like a 365 special inside

It ought to be a good runner then

 

[heimannm]

It would not fit on one bench.





Mark

 

[USMC615]

It would not fit on one bench.

View attachment 360465

View attachment 360466

Mark

I have never seen such…helluva brush cutter no doubt!

 

[sledneck22]

Bought a beat up 064 for funsies. Rethreaded and ezloc-Ed a bunch of fubar holes, put a dukes handle bar on original was all bent and max flow. Be a fun beater saw. Have to tune it and test it to see if it needs seals or anything else

 

[heimannm]

I have the 54 cc version as well, the one above is a McCulloch 250 power head, 80 cc. The manual recommends against felling trees over 6" in diameter.



Mark

 

[Kiwioilboiler]

The manual recommends against felling trees over 6" in diameter.

Lol.

 

[Maintenance Chief]

Fat bottom girls they make the rockin’ world go ‘round

View attachment 360411 View attachment 360412 View attachment 360413

Porting it?

 

[farminkarman]

Bought a beat up 064 for funsies. Rethreaded and ezloc-Ed a bunch of fubar holes, put a dukes handle bar on original was all bent and max flow. Be a fun beater saw. Have to tune it and test it to see if it needs seals or anything else View attachment 360474

That doesn’t look like a beater saw to me. Nice score I’d say.