What's on your bench?

[merc_man]

That Frog Gig = Some Good Eating!

You mean the spear? We used them to spear pike in spring when they come up the cricks to spawn.

Sent from my SM-G950W using Tapatalk

 

[MustangMike]

I was going to say they used them to spear Suckers + Carp in the Spring when they breed.

I never got into harvesting either of them but know people who did.

 

[merc_man]

First time dying plastic. Turned out pretty good

Sent from my SM-G950W using Tapatalk

 

[Duce]

Ms 201 tc durability test. Or should just replace climber. This saw needs about same parts, but twice the price. T540 took a drop, this one swung into tree Now I get to see which one is easiest to work on. Husqvarna is definitely toughest.

 

[Ronie]

Guy from the saw mill brought me a 450 with one of those spring assist starters that wasn't working so I replaced the the pulley with one out of a 350, no more spring assist but it works good. He also brought me a 391 that had lost it's muffler, expensive mufflers.

 

[Partner]

that's why he lost this muffler;-)

 

[Gullet]

Finally got around to sandblasting (80 grit Black Beauty medium) & painting my "Murdered Out" Craftsman 3.3 muffler...

Left the muffler & paint can in the hot sun for about an hour before painting.

Did 3 coats of Rust-Oleum high heat (1200°) grill paint.

I just did the front half of the muffler being the lazy arse I am!
Didnt even bother to do the bolts or washers.
It turned out really well & I WILL be doing others (with more attention to the details) in the future!

You can see the rust on the back saw...
View attachment 332486

It's a work saw so it doesn't really matter, I just dont like rust! Lol
Today...
View attachment 332487

Same Craftsman 3.3 in pic (last year).
I cut most (still A LOT LEFT to cut) off that Oak tree (18 ricks of wood) with 1 saw, 1 bar (3 chains).

Thats a 18" bar in the pic.
I've owned it (I have 2) over 20 years.
Nothing but simple maintenance.
You might have to zoom in to see the saw. Lol!

 

[WillG]

5 hp Tecumseh for a carb rebuild and oil change.

Sent from my E6910 using Tapatalk

 

[Gullet]

Same Craftsman 3.3 in pic (last year).
I cut most (still A LOT LEFT to cut) off that Oak tree (18 ricks of wood) with 1 saw, 1 bar (3 chains).

Thats a 18" bar in the pic.
I've owned it (I have 2) over 20 years.
Nothing but simple maintenance.
You might have to zoom in to see the saw. Lol!
View attachment 332713

I was so low on saw knowledge just a year ago, I got my 1 & only bar pinched & had to use a hatchet to chop it loose!

Thanks to this forum, I've improved my GAME!

Now, I have 7 saws & I'm in to the bigger part of that Oak now.

I have a 68cc Shindaiwa 695 w/24" b&c.


Got this one today Fedex...

 

[Gullet]

I need bigger saws!


16' circumference, 1 year seasoned Oak.
BRING YOUR BIG BOY SAWS!

 

[Gullet]

I need to have a GTG! LOL!

 

[Gullet]

I'd guess its close to Civil War Vintage.
I counted 108 rings in the split tops.
93 rings on one side, 108 on the other.

 

[Woodslasher]

I found this in the tank of my Husky 350. I'm not sure where the rest of it is, but I've gotta say this is a first for me.

 

[sawnami]

Disston DO-100. Adjusting the clutch and safety sprocket

Sent from my LE2117 using Tapatalk

 

[Partner]

Znalazłem to w zbiorniku mojego Husky 350. Nie jestem pewien, gdzie jest reszta, ale muszę powiedzieć, że jest to dla mnie pierwsze .
[DOŁĄCZ=pełne]332858[/DOŁĄCZ][/WYCEN
maybe someone reduced the weight of the saw ;-)

 

[Hinerman]

I need to have a GTG! LOL!

Where are you in AR? I may be able to help...

 

[Duce]

I found this in the tank of my Husky 350. I'm not sure where the rest of it is, but I've gotta say this is a first for me.
View attachment 332858

What type of fuel are you using. Nitro mixed with acetone?

 

[farminkarman]

Pulled the jug off my 359 that is slated for a 272 top end. Cut the squish and base before sending it to it’s new home.

 

[RI Chevy]

You making a Hooskie Hybrid?

 

[Gullet]

Where are you in AR? I may be able to help...

In between Alma & Ozark, North of I40.