What's on your bench?

[BonScott46]

Just finished a hybrid.
View attachment 324084 View attachment 324085 View attachment 324086 View attachment 324087 View attachment 324088

Is that a 460 handle?

 

[Kiwioilboiler]

371 vs 372 cases.

Sorry?

 

[Duce]

Sorry?

Nothing to be sorry about, those halves are usually harder to find.

 

[Kiwioilboiler]

Nothing to be sorry about, those halves are usually harder to find.

Cept the older case is 365, the newer 365SP, so I still don't pick up what you're putting down.

 

[Duce]

362 large mount, 365,365sp,371,372oe, are interchangeable. With grinding can be used on 372xt. Nothing else to say, guess I don't understand your point. Difference between them is updated case has gussets for strength.

 

[Kiwioilboiler]

362 large mount, 365,365sp,371,372oe, are interchangeable. With grinding can be used on 372xt. Nothing else to say, guess I don't understand your point. Difference between them is updated case has gussets for strength.

Oh. I thought you said they had updated bearing pockets. My mistake.

 

[Johnmn]

Just finished a hybrid.
View attachment 324084 View attachment 324085 View attachment 324086 View attachment 324087 View attachment 324088

Damn nice saw but I thought you were no longer taking port work?

 

[dustinwilt68]

Building another 440, this one is stock so far except for the timing advance.

 

[farminkarman]

Meh, somehow I got roped into putting one of these Farmertec kit saws together for a guy I work with. Since I'm at a standstill on another project I started putting this thing together last night. The guy I'm doing this for runs an MS260 and a 272xp...I'm curious to see how this thing turns out.

*Edit: I should add that one this is a 288 kit fwiw.

 

[Wolverine]

Meh, somehow I got roped into putting one of these Farmertec kit saws together for a guy I work with. Since I'm at a standstill on another project I started putting this thing together last night. The guy I'm doing this for runs an MS260 and a 272xp...I'm curious to see how this thing turns out.View attachment 324189

 

[Kiwioilboiler]

345e
I put a meteor, intake clamp, 357 dog with 372 roller and a one-legged 346 muffler bracket on this thing.
It's no MMWS346 tho, so off it goes.
Without the muffler bracket. What do I care if the next guy melts it.

 

[farminkarman]

The worst part is he could have taken the money he spent on the kit and put it into a good port job on his 272…would have been plenty of saw for him.

 

[HWRDBNZ]

This homelite CS-50 was.

 

[Xr650jkallen]

To big for the bench but was in the garage. Installed a new steer gear, steering shaft, hydro-boost, pump and all new hoses. It also got new king pins, and bushings. Still drinks fuel but steers like a dream while doing it.

 

[Northerner]

Assembling the 288, having a ton of used parts has come in handy already. Can’t wait to run this thing.

 

[Northerner]

Clutch shoes were just about ready to fly apart when the previous owner parked it. Check out how thin they are compared to the one I pulled off a dead 181 saw.

 

[WillG]

Tecumseh 5 hp snow king on a MTD 5/22 snowblower for a carb rebuild and oil change.

Sent from my E6910 using Tapatalk

 

[Ronie]

I tried some hair bleach on a 036 starter cover today, like @slackinoff did on his 61 cover in this thread https://opeforum.com/threads/husqvarna-61-build-630-super-162-closed-port-hybrid.25683/page-3, to see if it would lighten it up a bit, it bleached most of the stains out. Next, I'm going to try it on a tank.

 

[Ronie]

Looks good on the saw.

 

[RI Chevy]

Nice. Different.