What oil is best? and what ratio?

[Deets066]

All of mine do that.

 

[jmssaws]

13000 in the wood is like saying you got a 12" pecker! It's possible but not likely.

I'd believe the pecker over the other.

 

[mdavlee]

[emoji23]

 

[Moparmyway]

Holding 11,900 in the second cut (thats a .404 7 tooth, 25" bar in oak with a nice knot in the middle)

 

[Redbull661]

 

[jmssaws]

Almost 12000 in the wood, 404 7pin

 

[jmssaws]

I seen over 12 on the tach a few times but it averaged 11800 or so. Probably over 12 with 3\8

 

[Moparmyway]

32" ?

 

[jmssaws]

32" ?

Yes

 

[jmssaws]

*B-S....!! In the cut?

As fat as his saw is I doubt it turns 13000 no load.

 

[Brewz]

@jmssaws
Did you ever try the Valvoline oil in the blue bottle?

 

[jmssaws]

@jmssaws
Did you ever try the Valvoline oil in the blue bottle?

Got a gallon ready to try. Today or tomorrow

 

[Brewz]

I have an oil i got from a large hardware chain in Australia called Bunnings
It is "Ryobi" fully synthetic.
It is green, the bottle says it is made by Valvoline and I am thinking it is the same thing in a different bottle.
It smells nice and did leave a nice coating in my 039 that I ran it in at 40:1

I will be interested to see what you think.

I am on a quest for some Klotz Benol but be stuffed if I can track it down in Australia.
I did find one place online that sells only 5L bottles for $80 and are out of stock.

I am really interested in moving away from the fully synthetic thing to see how it goes

 

[Keith Gandy]

I believe all of it accept the 13000 rpm in the cut. I build some nice running saws and that's not possible unless you have race saws.

A 660 that turns 13000 in the cut I must see,the best one I've ever ran would turn almost 12000 in the wood.

I think he meant out of the cut. He is too smart to try and sell that one

 

[jmssaws]

I have an oil i got from a large hardware chain in Australia called Bunnings
It is "Ryobi" fully synthetic.
It is green, the bottle says it is made by Valvoline and I am thinking it is the same thing in a different bottle.
It smells nice and did leave a nice coating in my 039 that I ran it in at 40:1

I will be interested to see what you think.

I am on a quest for some Klotz Benol but be stuffed if I can track it down in Australia.
I did find one place online that sells only 5L bottles for $80 and are out of stock.

I am really interested in moving away from the fully synthetic thing to see how it goes

I'll send you some with the cylinder

 

[jmssaws]

I think he meant out of the cut. He is too smart to try and sell that one

Surely. If not I'd love to see it.

 

[Keith Gandy]

Or you might blow another cylinder.

Explain to us all how I blew that cylinder ???

 

[Keith Gandy]

Holding 11,900 in the second cut (thats a .404 7 tooth, 25" bar in oak with a nice knot in the middle)

Thats impressive with .404!!!

 

[Keith Gandy]

Gave my buddy John Laslab some kl200 to try out when he came to the shop this morning. He said it smelled like race day!! Lol

 

[CoreyB]

And think this is stock I paid a bit over $400 for it and it is noodling. That dolmar synthetic oil must be some awesome stuff.