The Swap Meet Thread

[Mastermind]

I have a few coils laying around, but no where near 1300 coils.

Can I ask why you need 1300 coils?

044 coils.....AKA the 1300 coil.

 

[maulhead]

044 coils.....AKA the 1300 coil.

I knew what you meant, I guess you missed my joke.

 

[PogoInTheWoods]

AKA 'the universal coil'..., or 'the 029 coil'. (Doesn't everyone have a pile of blown up 029s sitting in the corner?) LOL

They forgot to include the rest of the 1122 series. If your 066 has a compatible flywheel and doesn't have a 1300 coil, it should.

​

 

[Mastermind]

Early 034 and 036 coils are a bit different in shape. They can be altered slightly to fit the 044 - 461 etc though.

 

[PogoInTheWoods]

Couretesy DDave's extensive thread on the 1122s.​

​

​

 

[Mastermind]

Here's an example of an early 034 coil VS a more common 1300 coil.

1300 top, 034 bottom

 

[jacob j.]

Here's an example of an early 034 coil VS a more common 1300 coil.

1300 top, 034 bottom

View attachment 347847

I'll pop a couple of the regular 1300 coils in the mail to you this week. I have a few...

 

[Mastermind]

I'll pop a couple of the regular 1300 coils in the mail to you this week. I have a few...

Thank you JJ. Let me know what I owe you my friend. I have a few worthless government notes.

 

[Frank bierce]

Ed messaged me yesterday, thinks he has some. If not, I'll let you know.

Sounds good!!

 

[MustangMike]

I just declined to take a burnt 029. Should I be harvesting the coil??? I know where it is!

 

[Wilhelm]

I just declined to take a burnt 029. Should I be harvesting the coil??? I know where it is!

Cheap upgrade to 039 and flip?
I thought that was a thing.

Parts salvage is always an option.

 

[MustangMike]

I had already done that, guy loved it for 3 years then burned it up and replaced it with a MS-460. Wanted to return it to me and I told him no!

It was the first one of them I had done, and I believe I resolved not to work on them again ... plus I have too many other unfinished projects that I would put in front of doing this.

 

[Mastermind]

I had already done that, guy loved it for 3 years then burned it up and replaced it with a MS-460. Wanted to return it to me and I told him no!

It was the first one of them I had done, and I believe I resolved not to work on them again ... plus I have too many other unfinished projects that I would put in front of doing this.

Wanna unload it? My grandson is fixing saws to sell.

 

[MustangMike]

I may have something better than that for him.

 

[Mastermind]

I may have something better than that for him.

Sounds good Mike.

 

[MustangMike]

I'll send you a PM soon. Plus, Matt is holding that 029 for me if you want it.

 

[Mastermind]

I'll send you a PM soon. Plus, Matt is holding that 029 for me if you want it.

Thank you sir.

 

[redline4]

I'm looking for the ignition coil/solenoid wire harness for a Stihl Ms441c.
Just the 2 wires that plug into the coil and route up to the carb box.


After 30 minutes of looking my dealer told me he can't figure out which harness I need...
Don't have much to trade, but have dollars.

 

[Mastermind]

I'm looking for the ignition coil/solenoid wire harness for a Stihl Ms441c.
Just the 2 wires that plug into the coil and route up to the carb box.
View attachment 348303

After 30 minutes of looking my dealer told me he can't figure out which harness I need...
Don't have much to trade, but have dollars.

I'll call a friend Monday Ed. He's sharp on the IPLs. I'll see if he can get a new harness for it.

 

[redline4]

I'll call a friend Monday Ed. He's sharp on the IPLs. I'll see if he can get a new harness for it.

That would be greatly appreciated Randy. Let me know if you need the serial number for it.