The Swap Meet Thread

[Mastermind]

That would be greatly appreciated Randy. Let me know if you need the serial number for it.

Will do.

 

[DND 9000]

Wiring harness 1138 440 3005. The other part of the wiring connection is included with the trigger unit 1138 430 1001.

 

[PogoInTheWoods]

$12.99 and $56.99 respectively from an honest domestic dealer.

 

[nbbt]

I'm looking for a couple of parts for a 10-10A.
Muffler , style with louvered exhaust outputs (p/n:600002 I believe)
Qty 3 of the starter cover screws oem p/n: 62978. If these can be replaced with a off the shelf part I may go that route.

 

[timg]

I should have a complete muffler. The screws I would source through MaMaster-Carr. They sell/ship off a card. I can PM you pics by the weekend. Thx.

 

[nbbt]

I should have a complete muffler. The screws I would source through MaMaster-Carr. They sell/ship off a card. I can PM you pics by the weekend. Thx.

Thanks in advance Tim.


I'm getting a bit of oil leaking from the oil cap, not sure if it's sealing correctly or a vent issue.
I'm new to the 10-series of Mac's

 

[timg]

I like them. Loud and scary fun to run. Alot of knowledgeable members on here too in the Brand Specific McCulloch thread.

 

[nbbt]

Timg, I've been lurking in that thread as well.
I'm the one that claimed the 3 mini's (1x0 series) from you a couple of x-mas ago. They take a special kind of patience to work on them, that's for sure..

 

[Czed]

Anybody have a damn Husqvarna 240 that runs

 

[timg]

I'm looking for a couple of parts for a 10-10A.
Muffler , style with louvered exhaust outputs (p/n:600002 I believe)
Qty 3 of the starter cover screws oem p/n: 62978. If these can be replaced with a off the shelf part I may go that route.

Morning @nbb_ . Here is the muffler and hardware you are looking for. Nice shape no rusted out areas. PM me if interested. Ebay pricing is crazy on this one. I will be about half of that. Let me know.

 

[Sawcrazy]

Hey folks. I’m looking for an SEM coil for a dolmar 120 super
I have dirty green paper to trade, maybe I have some parts you need?

Sent from my iPhone using Tapatalk

 

[timg]

Sawzilla now has a couple different SEM style replacements available. Give them a call to verify fitment to your 120 Super. Hope this helps.

 

[Shane¹]

Hey folks. I’m looking for an SEM coil for a dolmar 120 super
I have dirty green paper to trade, maybe I have some parts you need?



I have a new kit if interested

 

[Sawcrazy]

Pm scent…


Sent from my iPhone using Tapatalk

 

[RockiesRider]

I'm looking for the ignition coil/solenoid wire harness for a Stihl Ms441c.
Just the 2 wires that plug into the coil and route up to the carb box.
View attachment 348303

After 30 minutes of looking my dealer told me he can't figure out which harness I need...
Don't have much to trade, but have dollars.

If I'm reading my parts list correctly you're looking for 1128 440 3002

 

[RockiesRider]

Looking for an 026 air filter cover in decent shape for the narrow filter and the tower style tank vent. An air filter to go with it would be cool, too.

TIA for any help.

Did you ever get ahold of an 026 cover

 

[PogoInTheWoods]

If I'm reading my parts list correctly you're looking for 1128 440 3002

That's an 044/440, 046/460 harness that's also used for the conventional 441 ignition module. Pretty sure he needed the bottom segment 1138 440 3005 for an M-tron module.

Did you ever get ahold of an 026 cover

Nope. PM inbound.

 

[PogoInTheWoods]

In the hunt for an 056 0900 0r 0902 muffler cover. Not picky.

 

[Wilhelm]

I need info!

I have taken a neighbors Husqvarna 365 Special with carb issues to the local Husqvarna dealer and she has been sitting in a cardboard box partially dismantled for two months now - supposedly ordered parts are out of stock and backordered.

Logically my neighbor called me about the saw, needs it for cutting firewood.
All I could say "not fixed yet!".

Now, I see this saw can take a Zama and a Walbro carb - are they direct swaps???

I ask because I could source an AM Walbro off eBay affordable and fast, but do not know what carb is on the saw OEM.

I just need this saw back assembled and in running condition, no more no less!

And, yeah - lesson learned.
Stay the f©k away from other peoples defective OPE!!!

 

[dahmer]

I need info!

I have taken a neighbors Husqvarna 365 Special with carb issues to the local Husqvarna dealer and she has been sitting in a cardboard box partially dismantled for two months now - supposedly ordered parts are out of stock and backordered.

Logically my neighbor called me about the saw, needs it for cutting firewood.
All I could say "not fixed yet!".

Now, I see this saw can take a Zama and a Walbro carb - are they direct swaps???

I ask because I could source an AM Walbro off eBay affordable and fast, but do not know what carb is on the saw OEM.

I just need this saw back assembled and in running condition, no more no less!

And, yeah - lesson learned.
Stay the f©k away from other peoples defective OPE!!!

https://www.jackssmallengines.com/j...aws/365-special-2003-11/air-filter-carburetor