The SCARR Husqvarna 592XP build thread.

[srcarr52]

That's why I don't like trying to time auto tune/m-tronic saws. I know the Stihl will about retune every cut. Husqvarna can suddenly change tune after it warms up enough.

The second gens seem to hone in on a tune much faster than the first gens but they might fluctuate a little more after that. Always tuning!

 

[Duane(Pa)]

My neighbors wish I would get an auto tune saw...Much less piss revving, and gives them more time to deliberate on why I cut my firewood so thin!

 

[AKJonsereds]

My neighbors wish I would get an auto tune saw...Much less piss revving, and gives them more time to deliberate on why I cut my firewood so thin!

Silly neighbors. Piss revving is all about scaring the wood in preparation for proper shredding and seasoning. More BTUs in terrified wood.

 

[Red97]

Dibz...

 

[Wonkydonkey]

My neighbors wish I would g
et an auto tune saw...Much less piss revving, and gives them more time to deliberate on why I cut my firewood so thin!

 

[Duke Thieroff]

May I?

 

[Dolkitafreak]

Did you measure compression stock? I’m digging the No stuffers.

 

[srcarr52]

Did you measure compression stock? I’m digging the No stuffers.

I have not found a decent compression adapter for these small plug threads. None of them have a Schrader or check valve in them so they add a lot of chamber volume which makes for inaccurate readings.

 

[super3]

I have not found a decent compression adapter for these small plug threads. None of them have a Schrader or check valve in them so they add a lot of chamber volume which makes for inaccurate readings.

Snap On has one

 

[Dolkitafreak]

I have not found a decent compression adapter for these small plug threads. None of them have a Schrader or check valve in them so they add a lot of chamber volume which makes for inaccurate readings.

Me either, I was hoping you had a method!

 

[srcarr52]

Snap On has one

I've been looking for just an adapter so I could use my trusted gauge but it looks like no one makes one with a check system. You have to buy a complete hose from Snap On (EEPV5G10S) which are on back order.

It looks like HF has kit with many hoses that might work, maybe I'll run down and grab one.

https://www.harborfreight.com/quick-connect-compression-tester-62622.html

 

[Woodpecker]

I've been looking for just an adapter so I could use my trusted gauge but it looks like no one makes one with a check system. You have to buy a complete hose from Snap On (EEPV5G10S) which are on back order.

It looks like HF has kit with many hoses that might work, maybe I'll run down and grab one.

https://www.harborfreight.com/quick-connect-compression-tester-62622.html

My experience with the hf set was the schrader valve was garbage. Ymmv

 

[Johnmn]

Am I the only one that is disappointed that this size saw has that tiny little plug?

 

[redline4]

I believe it's the top adapter in my pic.


What's the thread size on the new small saw plugs?

 

[Woodpecker]

I believe it's the top adapter in my pic.
View attachment 316151

What's the thread size on the new small saw plugs?

 

[Stump Shot]

I have not found a decent compression adapter for these small plug threads. None of them have a Schrader or check valve in them so they add a lot of chamber volume which makes for inaccurate readings.

Echo 91151 comes in the kit DDave sells.
Echo dealer should be able to order individually I would think.



And yes it has the Schrader valve in it.

 

[Maintenance Chief]

Hey now thats a nice set.

 

[Stump Shot]

Hey now thats a nice set.

It really is handy for all saw brands.

 

[Dieselshawn]

Do smaller plugs have a higher chance of thread stripping as plugs get changed over time?

 

[davidwyby]

Do smaller plugs have a higher chance of thread stripping as plugs get changed over time?

I’d be more worried about the length of engagement vs. the diameter.