MCCULLOCH The official McCulloch thread

[Dream]

Does the golf course get mad when you return the cart full of noddels and bark?

Dunno, havent taken it back yet. They havent found me either.

 

[Dream]

My dad had me order him a solid state coil for a 1010S years ago. He said the old one was bad. I got it from Scott at Chainsawr. I bet the ground connection at the coil screw was just crusty. He called and said the NOS one wouldn't fire. I called Scott. He said sand the laminations under the ground strap, clean the connector, and try again. Worked fine.

 

[heimannm]

Something for you to ponder.

Mark

 

[Al Smith]

A coil is in essence an auto transformer with a common ground for the low and high voltage windings connected together .The problem arises due to the fact the coil laminations are steel and the saw engine is aluminum alloy ,dissimilar metals .Galvanic reaction .Often over looked but could cause all kinds of problems .

 

[RandyMac]

Happy birthday Al

 

[Dream]

Happy birthday Al!
My better half 's is coming up the 14th. She's 39. Again. Son said she couldnt be 29 after he turned 30...

 

[Dream]

Something for you to ponder.

Mark

Never seen one. Also never seen a 4 stroke Mac engine. Any knowledge of how many were made and over how many years?

 

[Dream]

Got to run the saws more today. Got a lot of trees down and cleaned up.
No issues with any of the saws. 1010S, 7-10A, PM700 all ran great, and that 700 is AMAZING in soft wood with the 28" bar and full comp chain! It just flies thru.

 

[Gizzard]

Seems you have the saw happy with full set of teeth. I know a few people that would be happier eating with a full set of teeth.

 

[Dream]

Seems you have the saw happy with full set of teeth. I know a few people that would be happier eating with a full set of teeth.

True.
I guess that includes me too. Keep breaking the molars. Too much bite pressure. I say they just needs to make stronger teefs.

 

[Steve]

Seems you have the saw happy with full set of teeth. I know a few people that would be happier eating with a full set of teeth.

Yup. And that was the last time i ever talked chit to you in person Kevin!

 

[Gizzard]

Yup. And that was the last time i ever talked chit to you in person Kevin!

You’ll have the congregation here thinking I’m a “friends & family dentist special”. Wifey missing several too.

 

[Al Smith]

Teeth ? I've got $3500 worth of China clippers that reside in a cup at night .Not as good as what I was born with but better than what they became .You can't chew anything without any molars .What ,gnaw like a musk rat or something ?

 

[Dream]

Teeth ? I've got $3500 worth of China clippers that reside in a cup at night .Not as good as what I was born with but better than what they became .You can't chew anything without any molars .What ,gnaw like a musk rat or something ?

Almost. Gonna get a few implants as soon as its safe to do so. Rest of the grill is fine.

 

[Al Smith]

Georgia has about 9-10 grand in a bunch of implants .

 

[heimannm]

A fellow called me a few weeks ago looking for an oil tank for a 32/35/38 cc Mac, I was able to set him up. Today he dropped off a PM605 that needed some help.





All better now.





Mark

 

[heimannm]

I have been going through my collections of documents, shop manuals, IPL's, literature, etc. and have a few extras to move along. If you see something interesting let me know and we can try to work something out.

I think I have two originals and one single sided photo copy of the 1-40 1-50 1-60 Shop Manual.



I have one original and one copy of this supplement.


I have one or two of this SP125 General Service Information.





I think there are two of this 10 Series Electric Start System manual for the 3-10E, 5-10E, and 10-10E model saws.



One copy of the Mac 1-10 and 2-10 shop manual.



More to come.

Mark

 

[heimannm]

I think there are two copies of the Super Pro 80 General Service Information.



I think there are two or three originals of the Mac-10 Series Shop Manual.



Two copies of the Power Mac 6 Shop Manual.



I believe there are three originals of the Mini Mac 6 & 6A General Service Information.



One or two copies of the SP40 Shop Manual, also applies to the PM510 and PM515 saws.



A few more to follow.

Mark

 

[heimannm]

300 Series Shop Manual



600 Series Shop Manual



Mark

 

[nbbt]

I'm looking for some crankcase seal dimensions for p/n:83859, or MC-9157-310101.
Thanks in advance.