The Cross Performance 066 Top End

[Mattyo]

Cmon Matt you live for this stuff

Yes and no...I don't focus on testing and tweaking. But I do do a lot of vids lol.


My goal with saws is to get them running well and not have to tear into them again. ...I don't go back and swap and switch things or re grind cylinders often. I just do a lot of super boring videos so that the majority of basic common questions can be answered in video format and here on the forum we can focus on the more complex and interesting stuff

 

[bikemike]

Here it is in Red Oak with muff mod & timing advance.

Needs to be set for public

 

[MustangMike]

Sorry, I thought it was, will re check.

 

[MustangMike]

I think it is fixed, please give it a try. Thanks.

 

[angelo c]

Randy,
I like my Cross 066 set up a lot. would recommend it to anyone. has plenty of snot and at the price its an easy sell.
Im not much of a video star though. I do know when I like a saw....and its on loan to a tree service who has a penchant for blowing ANYTHING up.

now, for comparison , the 661 they were using is back in the truck getting old while the 066 is getting hammered. (the 661 has never really run right though. I have a solenoid and new filters ready to load for a better comparison. )

will report back on 661-cross 066 when the 661 is feelin better.

 

[bikemike]

Sounds good for a stock saw. Hope you get a jug and make a few cuts with same bar n chain

 

[Mastermind]

Randy,
I like my Cross 066 set up a lot. would recommend it to anyone. has plenty of snot and at the price its an easy sell.
Im not much of a video star though. I do know when I like a saw....and its on loan to a tree service who has a penchant for blowing ANYTHING up.

now, for comparison , the 661 they were using is back in the truck getting old while the 066 is getting hammered. (the 661 has never really run right though. I have a solenoid and new filters ready to load for a better comparison. )

will report back on 661-cross 066 when the 661 is feelin better.

Thank you sir for the feedback.,

 

[jacob j.]

Here it is in Red Oak with muff mod & timing advance.

That sounds pretty "crisp", which is a good thing. It sounds like it has slightly less exhaust duration than a Stihl-made jug.

 

[t4driller]

I have a stock mahle 066 cylinder here I could put on my 066rl and do some comparison, if you need more test dummies..

Sent from my SM-G930V using Tapatalk

 

[species8472]

My Cross Performance on first tank of fuel. A lot stronger after about 5 tanks now. Very happy with it. Loads of power to keep pulling.

 

[Stihl working Hard]

My Cross Performance on first tank of fuel. A lot stronger after about 5 tanks now. Very happy with it. Loads of power to keep pulling.

Saw runs well awesome thanks for sharing

 

[bikemike]

My Cross Performance on first tank of fuel. A lot stronger after about 5 tanks now. Very happy with it. Loads of power to keep pulling.

Wow that's some dry dusty wood

 

[Gentleman]

Sure! I even have a piece of 32" Red Oak I have not milled yet that I can cut a few cookies from.

Sending one to you today Mustang.

You gonna do one too @Deets066 ?

 

[Deets066]

Sending one to you today Mustang.

You gonna do one too @Deets066 ?

I sure will Brucey

 

[Redfin]

 

[Redfin]

Just pitchin here @Gentleman if/when you are looking for any to test drive the 54mm thick base jugs for 064.

Ill step up to da plate.

 

[Deets066]

Just pitchin here @Gentleman if/when you are looking for any to test drive the 54mm thick base jugs for 064.

Ill step up to da plate.

 

[MustangMike]

I got confirmation that it shipped to me.

Now, if I could just figure out how to leave a comment when I subscribe to their youtube, I could enter to win a saw!

 

[Frank bierce]

I got confirmation that it shipped to me.

Now, if I could just figure out how to leave a comment when I subscribe to their youtube, I could enter to win a saw!

I did the same...lol. Keep scrolling down to the bottom of the page....after all the "suggested" videos. Found it down there.

 

[T.Roller]

I'd be interested in one for a 064 I have