Stihl 1125 (034/034S/036/360) Cylinder/Saw ID

[Cracker Boy]

Like @Stihlsmoking said, it's still a great little saw. I bet it's a red lever. Is it a side tension version like @Canadian farm boy stated?

I'm gonna build a 034 next. As I have a 036, and they're a great saw. I'd like to have the carb off of it, as I can't find one, and I'll bet it's a Tillotson.

 

[J_M____]

And I’m supposed too have 036 plastics coming from J_M that I traded my 044 parts for and don’t know if it’s gonna Work or not now

Plastics will work, will just have a hole for the decompression port since they were from a 036 pro. Only the non pro models had no decompression port I believe

 

[Mkinslow]

Front or side chain tensioner?

Yes sir

 

[Mkinslow]

That's an early German maybe west German 034 ? Still good saws not 036. But good saws.

It does say west Germany on recoil and serial number starts with 1 which I believe means Germany?? Correct??

 

[Mkinslow]

Plastics will work, will just have a hole for the decompression port since they were from a 036 pro. Only the non pro models had no decompression port I believe View attachment 96810

Send it on bud. This one will just be added to the line up for now

 

[Mkinslow]

Like @Stihlsmoking said still a great little saw i bet its a red lever.is it side tension like @Canadian farm boy farm boy stated.im gonna build 034 next as i have a 036 there a great saw.id like to have the carb off of it.i cant find one i bet its a tillotson

It is a side tension but mine has Zama carb

 

[Cracker Boy]

I'm not so sure the filter cover is gonna work. I believe he needs the old style.

 

[Backtroller]

I've had great luck with the Zama carbs for this model. I have a Tillotson coming shortly and I'll see how it runs compared to the Japanese Zama.

Even the knock of Zama I bought from Dave runs nicely.

 

[Mkinslow]

Im not so sure filter cover is gonna work i believe he needs old style

Well you spoiler

 

[Stihlsmoking]

I've had great luck with the Zama carbs for this model. I have a Tillotson coming shortly and I'll see how it runs compared to the Japanese Zama.

Even the knock of Zama I bought from Dave runs nicely.

I've got both and can't tell the difference when swapped??

 

[J_M____]

Im not so sure filter cover is gonna work i believe he needs old style

I included a 036 filter with the covers. If you cover the rectangle port for the intellicarb on the back of the filter it should allow the cover to fit properly.

 

[MustangMike]

I included a 036 filter with the covers. If you cover the rectangle port for the intellicarb on the back of the filter it should allow the cover to fit properly.

Your in Danbury? That is right next door!

 

[Stihlsmoking]

It does say west Germany on recoil and serial number starts with 1 which I believe means Germany?? Correct??

Yes 1 is Germany.

 

[Mkinslow]

Yes 1 is Germany.

Thanks

 

[Stihlsmoking]

Here's my 034.

 

[Mkinslow]

Here's my 034. View attachment 96836
View attachment 96837

That’s a good looking saw brother. I was shocked at how well mine cleaned up. I’ll post some pics tomorrow

 

[Canadian farm boy]

Your in Danbury? That is right next door!

Hey Mike, don't you have a barn find 034 or was it a 036?
What ever happened with that saw?
Last I remember you were doing something with the oil pump hose.

 

[MustangMike]

I have it, think I have all the parts, but it is still in a box in the shed. It is an 034 with the front adj, closed port.

I initially thought it just needed a piston, so I got a OEM piston, then when I pulled it down saw the oiler was bad, the seal, the bearing ... I have new bearings & seals in, passed vac/pressure test, and that is how it is. Have trouble getting motivated to do it with my other projects and my MOFO 360!!! I even have a steel screen filter for it!

 

[J_M____]

I have it, think I have all the parts, but it is still in a box in the shed. It is an 034 with the front adj, closed port.

I initially thought it just needed a piston, so I got a OEM piston, then when I pulled it down saw the oiler was bad, the seal, the bearing ... I have new bearings & seals in, passed vac/pressure test, and that is how it is. Have trouble getting motivated to do it with my other projects and my MOFO 360!!! I even have a steel screen filter for it!

We will need to run your mofo 036 vs my own ported 036 one day

 

[MustangMike]

Sounds like a plan to me!