So what did you do today?

[Wilhelm]

Playing with my Dolmar PS-550 in my firewood log pile.
Bucked up two logs, the PS-550 is doing great with a new chain, Oregon semi chisel courtesy of Sondre @SOS Ridgerider - thank You very much my friend.
Dolmar Power Products chaps are also mine thanks to Sondre.

 

[merc_man]

mini mac finally found a use as a splitting wedge?

congratulations grandpa!

Mac 330. Little better than a mini mac to work on.

Sent from my SM-G950W using Tapatalk
Also makes a good wheel chock.

 

[ranchdadmike]

Welcomed our first grandson into the world at 0500 this morning.
Christmas dinner interrupted as he wasn’t due till the 6th.

Greyson Dakota Noriel



Erik

Congrats!

 

[Wilhelm]

I made good progress, four logs bucked, split and stacked.
My dad did all the stacking, good thing too because I really dislike stacking.
The rack for next winters firewood is full.



My Dolmar PS-550 and PS-7310 came out to play today.
My old faithful dragon slayer did all the splitting.

It was a good day spent outside in the fresh air doing something useful.

 

[Viper21]

Cut a load, with my youngest jarhead today. He came all the way from Callyforny (29 Palms) to hang out for the holidays. Had to take him out to the woods for some PT. My sweetie was glad to see him too

 

[Daserlon]

5 of my friends and myself cut a big fir tree for fire wood. It had around 2 cords of wood in it. We had a good line up of saws. Husky 394, 390, 288 281, 272 and a dolmar 120si. I'm bad at remembering to take pictures but I got one of the trucks loaded.

 

[merc_man]

Worked on my littlecraftsman saw. Got it back togeather and running. Then had to go let friends of ours dog out. He is a hyper little bugger. Now helping with supper. Well not really. Trying to avoid that part.

Sent from my SM-G950W using Tapatalk

 

[Frank bierce]

Worked on putting some new wall-pack lights on one of the local schools. View from the bucket...

 

[GCJenks204]

Worked on putting some new wall-pack lights on one of the local schools. View from the bucket...
View attachment 156740 View attachment 156741 View attachment 156742

Whose WP? What size? How did you like them?

 

[Dub11]

Worked on putting some new wall-pack lights on one of the local schools. View from the bucket...
View attachment 156740 View attachment 156741 View attachment 156742

Whatchu doing working?
And can I borrow that bucket truck......

Whose WP? What size? How did you like them?

Trying to make a sale?

 

[Frank bierce]

Whose WP? What size? How did you like them?

I have one more to get installed...I’ll check in the morning.

 

[Frank bierce]

Whatchu doing working?
And can I borrow that bucket truck......

It’s back to work time. Actually went back last week. Bucket truck works, but needs a fair amount of maintenance. It is nice to use whenever I need though.

 

[GCJenks204]

Whatchu doing working?
And can I borrow that bucket truck......


Trying to make a sale?

Not really but always looking to see what people are using and how they like them. Our primary supplier of outdoor commercial LED pulled out of Canada in November so I am stilling looking at what brand(s) we are going to stock. Installer input is important to me.

I have one more to get installed...I’ll check in the morning.

Thanks.

 

[Frank bierce]

5 of my friends and myself cut a big fir tree for fire wood. It had around 2 cords of wood in it. We had a good line up of saws. Husky 394, 390, 288 281, 272 and a dolmar 120si. I'm bad at remembering to take pictures but I got one of the trucks loaded.
View attachment 156665

That’s one heck of a saw crew!!

 

[weeks auto]

Swapped out the carb on my ms460 for a Chinese pos that I had laying around. It runs great now. It was randomly leaning out. I'm a little skeptical of the 20 dollar carb. Not sure what is wrong with the oem walbro but need to get a sonic cleaner and research possible issues with them.

 

[MustangMike]

You are lucky the Asian carb worked well, there have been a lot of issues with them recently. (The older ones seemed to work better than the newer ones).

You don't need a sonic cleaner for your car (although they are nice), a gasket kit and some carb cleaner should be able to get it done.

 

[weeks auto]

I cleaned it with carb cleaner and blew air through it and put a lot in it last year when I got it. It never did ran great. The Asian carb came with the saw. The shop I bought it from was gonna through the Asian carb on it and sell it. I bought it and went through the carb and there was some epoxy like stuff in the needle and seat area. So I picked it out and cleaned it best I could. I wonder if a sonic cleaner might break some hidden grime loose. Worth a try before I buy an oem carb or perhaps try an hd50.

 

[MustangMike]

DDave has some AM Walbro Carbs that are manufactured by ZAMA that are about 1/2 price and have been working very well for me. I trust ZAMA as much as Walbro.

http://chainsawcc.com/replacement-walbro-style-carburetor-for-stihl-ms440-044-046-ms460-chainsaws/

 

[Frank bierce]

Not really but always looking to see what people are using and how they like them. Our primary supplier of outdoor commercial LED pulled out of Canada in November so I am stilling looking at what brand(s) we are going to stock. Installer input is important to me.




Thanks.

Econolight is primarily what we use. I thought that is what I was I stalling, but wanted to verify first. Lol. Haven’t fired them up yet. Installation on these was fairly easy, and user friendly.

 

[GCJenks204]

Econolight is primarily what we use. I thought that is what I was I stalling, but wanted to verify first. Lol. Haven’t fired them up yet. Installation on these was fairly easy, and user friendly.
View attachment 156785

Thanks, amazing the differences in different markets. We wouldn’t supply those, all outdoor is typically DLC or DLC Premium rated. We supply very little LED with the old style look, the optics are just terrible.