Saw video thread

[jmssaws]

Makes sense


Sent from my iPhone using Tapatalk

Also a saw that stays tuned and is easy to start is a necessity when your a mile from the truck,I hate to break the starter or pull rope and have to walk out.

 

[junkman]

Also a saw that stays tuned and is easy to start is a necessity when your a mile from the truck,I hate to break the starter or pull rope and have to walk out.

A work saw that is user friendly ? You may be on to something .

 

[jmssaws]

A work saw that is user friendly ? You may be on to something .

Lol

 

[CR500]

Can I run a 7 pin on the 661?

Don't wanna ruin chain lol

Sent from my non internal combustion device.

 

[jmssaws]

Can I run a 7 pin on the 661?

Don't wanna ruin chain lol

Sent from my non internal combustion device.

I was boring when I did that also it could be a bad chain. It's a stihl chain
I think it's a fluke

 

[bikemike]

View attachment 26520

I'd that the stihl 3/8 lo pro? I did the same thing to a lopro and snapped another chain

 

[jmssaws]

I'd that the stihl 3/8 lo pro? I did the same thing to a lopro and snapped another chain

3/8 050 no lopro

 

[Lightning Performance]

Also a saw that stays tuned and is easy to start is a necessity when your a mile from the truck,I hate to break the starter or pull rope and have to walk out.

It better do all that at the shop and/or woodpile before it goes in the truck.

 

[Deets066]

Will have some video tomorrow, new fuel line on the hybrid. Old one had a little malfunction

 

[Deets066]

 

[Chris Zautner]

View attachment 26740

View attachment 26741

Now There's the Problem!

 

[Deets066]

It actually ran well like that for about 10 cuts

 

[Deets066]

Got the fuel line fixed and mounted my hard line

 

[Brewz]

What happened to all the video's?

I cut up a huge big eucalyptus late last year and quartered up the rounds so they could be lifted.
It is really hard stuff and my dad's 22t hydraulic splitter wont split it.

When you cut into them, the cut closes up on its self and it clamps the bar and chain.
I was making an 064 and MS660 work hard cutting them and decided to give my 076 a go.
The wide bar made the clamping effect worse, and watch what happens after I give the aux oiler a couple pumps and the oil hits the hot clutch and exhaust.

Smokin' up the 076!

 

[paragonbuilder]

Got the fuel line fixed and mounted my hard line

View attachment 26742

No air filter cover?


Sent from my iPhone using Tapatalk

 

[Deets066]

No air filter cover?


Sent from my iPhone using Tapatalk

Max flo

 

[Deets066]

What happened to all the video's?

I cut up a huge big eucalyptus late last year and quartered up the rounds so they could be lifted.
It is really hard stuff and my dad's 22t hydraulic splitter wont split it.

When you cut into them, the cut closes up on its self and it clamps the bar and chain.
I was making an 064 and MS660 work hard cutting them and decided to give my 076 a go.
The wide bar made the clamping effect worse, and watch what happens after I give the aux oiler a couple pumps and the oil hits the hot clutch and exhaust.

Smokin' up the 076!

That don't look like any fun at all

 

[paragonbuilder]

Max flo

Thought so.
I mounted mine on the ms460 sticker

Sent from my iPhone using Tapatalk

 

[Brewz]

That don't look like any fun at all

Na mate, we dont have polystyrene trees for fast cuttin videos down here unfortunately.

Its the first time I have seen wood clamp in like that, literally jamming the bar and chain.

Evil timber!

 

[Deets066]

Na mate, we dont have polystyrene trees for fast cuttin videos down here unfortunately.

Its the first time I have seen wood clamp in like that, literally jamming the bar and chain.

Evil timber!

Probly damn good fire wood though