Raising The Uppers With The CC Speciality 182 AMC

[Mastermind]

I talk to a lot of guys that tell me how they have trouble with the right angle handpiece jumping and chattering in the corner when they are working the uppers. I made a video several years ago on this....but I thought I could make a better one with Jon's help. Here it is.

 

[Sloughfoot]

That helps a lot. Do you remove the nikasil/chrome beforehand with a diamond or ferrous bit or take it off too with the nonferrous bit in one pass?

 

[Mastermind]

That helps a lot. Do you remove the nikasil/chrome beforehand with a diamond or ferrous bit or take it off too with the nonferrous bit in one pass?

No.....I just tear into it with the NF buff.

 

[Sloughfoot]

Good to know. Got my first NF bits and didn't know if plating dulled them or not.

 

[Mastermind]

Good to know. Got my first NF bits and didn't know if plating dulled them or not.

It does dull them. But it takes more than a few jugs.