Saw video thread

[RI Chevy]

Looks good. Cuts well too. [emoji106]

 

[RI Chevy]

Cool Wolverine. Who makes it?
I personally think it is easier to just hold it in place when you need it.
But that is cool.

 

[Wolverine]

I can't embed the vid he posted so I'll try a link for those that can. And you can also see his name in the link. If anyone recognizes the name please lmk, I'd love to get an ok with him that I posted here. https://www. facebook.com/ chris.riley.986/ videos/ 1297525500329088/
You'll have to remove the spaces I put in the link. I couldn't get it to stop trying to embed.

 

[Time's Standing Stihl]

Here it is:
View attachment 61894
https://scontent.slackerc1-2.fna.fbcdn.net/v/t1.0-9/17190540_1295487327199572_3980595491757302740_n.jpg?oh=70ce45ae327095fdfc0afbed12b1f0b3&oe=5965FDCE
https://scontent.slackerc1-2.fna.fbcdn.net/v/t1.0-9/17308860_1295487373866234_5275537590164505145_n.jpg?oh=b06ae5a523d5a3e0cec7312254351bb0&oe=595413E3
https://scontent.slackerc1-2.fna.fbcdn.net/v/t1.0-9/17203243_1295487417199563_4531835409745317588_n.jpg?oh=cc597ecc3bdd7436068378f340783e05&oe=596883B1

That's pretty sweet. Any more info on that mount?

 

[malk315]

Looks maybe 3D printed. If they have the model I could print one.

Sent from my XT1585 using Tapatalk

 

[RI Chevy]

I can't seem to get that link to work. I tried yo search youtube as well. No luck.
Really cool product though. [emoji106]

 

[MustangMike]

I'm still learning and testing what raker hight I like with my square file. And my filing still needs some work but I'm getting there. I have a couple chains that's way to aggressive and one that's sharp but is slow like it's dull. Here's a decent chain I was testing with a 8 pin. If you have to pry it seems your just putting pressure on the raker

You may want to try cleaning the gullet, otherwise, it looks good.

 

[Wolverine]

I think the only way you can get the link to work is if you are signed in to fb. And if you are... you could message him (his profile pic is of a mustang front end). In the video the tach is vibrating like crazy!

 

[RI Chevy]

TY.

 

[jmssaws]

 

[mdavlee]

Looks maybe 3D printed. If they have the model I could print one.

Sent from my XT1585 using Tapatalk

He did print it

 

[RI Chevy]

YOU MAKE THE CALL!
Stihl MOFO 026

First is .325 7 pin Stihl 18" bar full chisel chain.

This tach photo is an in the cut reading.

Second is .325 8 pin Stihl 18" bar full chisel chain.

This tach photo is in the cut reading.

Third is 3/8 7 pin Stihl 18" bar full chisel chain.

This tach photo is in the cut reading.

I have not timed any of these.
This was the overall tune. It is a little fat.

 

[Armbru84]

The .325 8 pin seemed to fly through the last 33% of the cut.

 

[RI Chevy]

Yup. Wood wasn't the best. I thought the .325 8 pin was best, but I felt the bar after making several more cuts, and bar was fairly warm as compared to the other tests I did.

 

[MustangMike]

drop them rakers!

 

[RI Chevy]

I did Mike. I took two passes off the rakers before I started. Each test had a touched up chain. That was with the .325 7 pin video. Took the in cut rpms from 13500 to 12765.
Should I go more?

 

[paragonbuilder]

I did Mike. I took two passes off the rakers before I started. Each test had a touched up chain. That was with the .325 7 pin video. Took the in cut rpms from 13500 to 12765.
Should I go more?

I'd bet that your saw will cut best somewhere around 10-11k Jeff.
The way I see it, you payed for more power, you might as well use it!


Sent from my iPhone using Tapatalk

 

[RI Chevy]

I posted my results . I did. 325 7 pin, .325 8 pin, and 3/8 7 pin.
Let me know which is best.

 

[dall]

jeff how low are the rakers now you know they want numbers they cant handle how good the 026 cuts

 

[paragonbuilder]

jeff how low are the rakers now you know they want numbers they cant handle how good the 026 cuts

Lol


Sent from my iPhone using Tapatalk