Saw video thread

[Lsf]

video test

 

[huskihl]

 

[jacob j.]

Looking good Mr. K. Is that one running the Zama? I was also checking out the XS-2175, what did you think of that Wiseco piston?

 

[huskihl]

Looking good Mr. K. Is that one running the Zama? I was also checking out the XS-2175, what did you think of that Wiseco piston?

No. This one had the hd. The stock one that was for sale had the Zama.
Dave’s CCC pistons are pretty sweet. Made from a hard alloy

 

[PA Dan]

359...

 

[Canadian farm boy]

Fresh off the bench.

@Woodpecker

 

[TreeLife]

Fresh off the bench.

@Woodpecker

Eye just seens dat on muh yewtoobs

 

[rogue60]

The vid of the 270 Canadien in Radiata Pine chain is hungry is to much in the softwood I'm no good at sharpening for softwoods I rarely get to cut it not sure what's going on it cuts hardwood fine not so aggressive?
Will get a vid of it in some Box to show the difference the hardwoods I'm talking of are like almost 3 times harder than White Oak.

 

[huskyboy]

 

[Red97]

 

[Wolverine]

Sorry if you clarified elsewhere, was the 365 a closed port Special @ 65cc?

 

[huskyboy]

Sorry if you clarified elsewhere, was the 365 a closed port Special @ 65cc?

Yessir, closed port and 65cc.

 

[malk315]

Is that a 48 mm piston in tbe 65 cc special closed port.

We gotta get the one I have and yours together for some.comparison.... the one I have put together at Dan's has woken up nice. Powerful.


Sent from my Pixel 3 using Tapatalk

 

[huskyboy]

Is that a 48 mm piston in tbe 65 cc special closed port.

We gotta get the one I have and yours together for some.comparison.... the one I have put together at Dan's has woken up nice. Powerful.


Sent from my Pixel 3 using Tapatalk

Yes she is 48mm, this one has a popup piston and basic woods port with the ports widened. Nothing groundbreaking. That would be interesting to compare for sure.

 

[Mkinslow]

372xp before porting

Sent from my SM-G892A using Tapatalk

 

[Mkinslow]

372xp after porting work done by @davidyoung

All cuts before and after are with same bar and chain,chain untouched and saved for this video

Sent from my SM-G892A using Tapatalk

 

[Mkinslow]

Can someone else time the videos I put up of the before and after porting 372xp. I'm getting times right on top of each other, not starting a fight over it just trying to get opinions for @davidyoung
Saw feels like it has more torque to me than it did

 

[Bigmac]

Can someone else time the videos I put up of the before and after porting 372xp. I'm getting times right on top of each other, not starting a fight over it just trying to get opinions for @davidyoung
Saw feels like it has more torque to me than it did

Ya doing it on my phone it seemed close, may need to adjust the chain to take advantage of the power, might pull an 8 pin too

 

[Mkinslow]

Ya doing it on my phone it seemed close, may need to adjust the chain to take advantage of the power, might pull an 8 pin too

That's what we're thinking, gonna make some adjustments and try some stuff

Sent from my SM-G892A using Tapatalk

 

[Mkinslow]

Ya doing it on my phone it seemed close, may need to adjust the chain to take advantage of the power, might pull an 8 pin too

That's what we're thinking, gonna make some adjustments and try some stuff

Sent from my SM-G892A using Tapatalk