Rebuilding The JMS 064

[Al Smith]

On that name plate try some Loctite 5900 RTV .It will just about stick any thing to anything.Nice job BTW

 

[Keith Gandy]

You will tomorrow or the next day.

Man that stuff is a pain to put in. I made an adapter to fit the end of the hose and use compressed air to help get it on

 

[dustinwilt68]

Go tonthe auto parts store and get 3M emblem adhesive, it will hold anything I use it all the time here

 

[Mastermind]

It's already stuck on.......I'd just like to add the rivets so it looks right.

 

[drf256]

I just wanna say......after being inside of two of Jason's saws in the last two days.

If you read this Jason.......

I know the feeling. You only get the full effect when you've been through one.

 

[MustangMike]

It just baffles the crap out of me that the port work can be so good, and EVERYTHING else is crap!!!

I'm starting to suspect a twin locked in the attic! There is just something not right about this whole thing.

 

[RI Chevy]

He does good on the hard part, and then f*cks up the easy stuff. ?????

 

[Adirondackstihl]

It's already stuck on.......I'd just like to add the rivets so it looks right.

^this

 

[hoskvarna]

Found another one of Jason's stolen test covers.

View attachment 87930

[emoji33][emoji33][emoji33]


Sent from Hoskvarna Hills

 

[hoskvarna]

It's already stuck on.......I'd just like to add the rivets so it looks right.

Pop rivet
Good nuff for who its fer. Lol [emoji23] just kidding.
Good job Randy [emoji106]
Attention to detail means a lot!
At least it does to me.

Btw whered ya put the shavings ?[emoji33]lol
What a dipchit [emoji35]


Sent from Hoskvarna Hills

 

[Adirondackstihl]

I have some blind rivets that would look near perfect.
Because you'd be installing them in plastic, you would need a drop of adhesive or similar in the hole you'd be drilling.

 

[Mastermind]

I have some blind rivets that would look near perfect.
Because you'd be installing them in plastic, you would need a drop of adhesive or similar in the hole you'd be drilling.

@Definitive Dave, or @Glock37 might have some of those rivets. I would imagine that @Manofstihl066 wants to get his saw back asap though.

 

[p61 western]

@Definitive Dave, or @Glock37 might have some of those rivets. I would imagine that @Manofstihl066 wants to get his saw back asap though.

Have you made any cuts with it yet?

 

[big t double]

It's already stuck on.......I'd just like to add the rivets so it looks right.

Let me know if Mike or dave don't have em...I think I might have a couple in stock. I'll check tomorrow. You can have em if they don't got em.

 

[Manofstihl066]

@Definitive Dave, or @Glock37 might have some of those rivets. I would imagine that @Manofstihl066 wants to get his saw back asap though.

Randy those rivets ain't a big deal. I could always put those on later. You and the fellas here have done more than enough. That plate ain't goin anywhere, whatever he glued it on with holds strong.... I tried to peel it up and couldn't.

 

[Mastermind]

Have you made any cuts with it yet?

Sir No Sir

Let me know if Mike or dave don't have em...I think I might have a couple in stock. I'll check tomorrow. You can have em if they don't got em.

Thank you Big T......but....

Randy those rivets ain't a big deal. I could always put those on later. You and the fellas here have done more than enough. That plate ain't goin anywhere, whatever he glued it on with holds strong.... I tried to peel it up and couldn't.

Fair enough Brad. I'll fire it up tomorrow and make sure it oils ok.

If not I'll run over it with the bush hog.

 

[RI Chevy]

Looking forward to the videos. [emoji106]

Sent from my SM-G930V using Tapatalk

 

[Mastermind]

Looking forward to the videos. [emoji106]

Sent from my SM-G930V using Tapatalk

I didn't do any work to the jug aside from true up the squish and the base.......no reason for me to make a video of it.

 

[RI Chevy]

Lol. OK. We all just love videos though. Live vicariously through each and every builder and saw user. [emoji106]

 

[blsnelling]

I don't have the rivets for this.......and have no idea what Jason used to glue it on.

View attachment 87953

The rivets are still available from Stihl.