Raffle For Fellow OPE Member "hoskvarna"

[wildroamer]

If you could pimp out your avatar, hoskvarna could retire!

 

[hoskvarna]

. Fire was so hot ,that is what the springs on the boys truck did.


From the Hills

 

[hoskvarna]

. Got the ranger replaced. We've got 90% of siding and roof tin loaded on trailer headed for scrap yard. Makin some progress. Then possibly 5-10in of snow comin Tuesday and Wednesday, don't need that.


From the Hills

 

[166]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum)
2. Husqvarna s2800 splitting ax (tlandrum)
3. Free woods port (Miller Mod Saws)
4. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
5. Service to dress a bar (SquareFile)
6. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
7. Brand new fiskars x25 axe. (sawmikaze)
8. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
9. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
10. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
11. Free saw porting job. (jmssaws)
12. Stihl 056 AV powerhead only. (Gary Courtney)
13. Wilton Bash 6# Splitting Maul (svk)
14. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
15. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
16. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)

CLICK HERE TO DONATE

 

[Yukon Stihl]

Hi All
I have a shop full of tools and stuffs and would hate to have to replace it even if it was all paid for...
So i would like to add a 262XP to the list.I don't have the parts or time to get it running before the raffle ends.So if someone wants to fix it or port it i will send it to them.
Or it can be a project saw for the winner.
It's a fairly clean unmolested saw,i did a vac test that held over the weekend so i believe it was a victim of straight gas. The piston is scored and that's as far as i got with it.
PM me if you want the task of getting it running,if not i will send it to a winner.Or if it's not worthy of the raffle let me know,i have thick skin.
Hope it can help the cause some.
Thomas

 

[jed1124]

I'm in...........

 

[jed1124]

Hope things start looking up for ya hoskvarna.

 

[Mastermind]

Hi All
I have a shop full of tools and stuffs and would hate to have to replace it even if it was all paid for...
So i would like to add a 262XP to the list.I don't have the parts or time to get it running before the raffle ends.So if someone wants to fix it or port it i will send it to them.
Or it can be a project saw for the winner.
It's a fairly clean unmolested saw,i did a vac test that held over the weekend so i believe it was a victim of straight gas. The piston is scored and that's as far as i got with it.
PM me if you want the task of getting it running,if not i will send it to a winner.Or if it's not worthy of the raffle let me know,i have thick skin.
Hope it can help the cause some.
Thomas

It is very worthy. I'd love to jump right in and offer to repair it. I have a lot on my plate though, and I'm trying hard not to add more.

Someone will take on that task I'm sure.

 

[paragonbuilder]

If this raffle is gonna go on for a while, I'll have time. I'd be happy to do it!


Sent from my iPhone using Tapatalk

 

[Mastermind]

If this raffle is gonna go on for a while, I'll have time. I'd be happy to do it!


Sent from my iPhone using Tapatalk

You are a good man Dan.

 

[Greenthorn]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum)
2. Husqvarna s2800 splitting ax (tlandrum)
3. Free woods port (Miller Mod Saws)
4. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
5. Service to dress a bar (SquareFile)
6. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
7. Brand new fiskars x25 axe. (sawmikaze)
8. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
9. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
10. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
11. Free saw porting job. (jmssaws)
12. Stihl 056 AV powerhead only. (Gary Courtney)
13. Wilton Bash 6# Splitting Maul (svk)
14. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
15. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
16. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
17. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder)
18, New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
19. Slightly used hard-nosed Mac bar, NOS. (Metals406)


CLICK HERE TO DONATE

 

[countryhog]

How do us "cash only" guys get in on this?

 

[Mastermind]

Get with Mark.......and send it straight to him. You two just keep up with the amount of chances so it will be right when we do the drawing.

 

[jmssaws]

When I was 4 are house burned on Christmas day and we was left with the clothes on are backs,I was young but it still sucked. I've got a few more items that I will give,don't have much money but I've got saws and parts. I'll get a list together in the next couple days.

I'm proud to be part of this.
Thanks, Jason Stratton

 

[Mastermind]

When I was 4 are house burned on Christmas day and we was left with the clothes on are backs,I was young but it still sucked. I've got a few more items that I will give,don't have much money but I've got saws and parts. I'll get a list together in the next couple days.

I'm proud to be part of this.
Thanks, Jason Stratton

Rep for you Jason.

 

[metallic]

Check me in for this Wiha kit.

 

[metallic]

Don't under estimate that yellow handled mo'fo. Any Hosqvarna you're gonna take apart will see it.

 

[jmssaws]

Don't under estimate that yellow handled mo'fo. Any Hosqvarna you're gonna take apart will see it.

Husqvarnas don't need tools to take apart,the bolts already fell out just pull on whatever you want to remove. Lol

 

[Homelite410]

Check me in for this Wiha kit.

Man o man I been drooling over one of them for awhile.

 

[michaelmj11]

I don't have parts or saws (unless you want the slightly melted poulan dressed in Husky clothing).

But if you needed extra hands for a "barn raising" as it were... I'd be more than happy to show up and help out...