HUSQVARNA Post your favorite 2series Husky.

[Simondo]

thats cool dont think many have study or seen this one. At least it's new for me
Please continue to post up different things you see on the good old 2xx's, I for sure love to see them

What is the serial number to this one?

Will do…

 

[Simondo]

lol yeah, ask the lads who buy 262 92-94, you never know what you get before you study what cylinder&carburator it has!

Iv got a 262xp that was bought brand new around then..only saw iv ever owned from the start ! You have got me thinking…must look it over to see what i have.

 

[SawTroll]

Looks like iv fallen for the assumption that if you find something on some Husqvarna's, then they all are like it

That seldom is the case with any brand. The models change with time (product development), and sometimes with part logistics etc. as well....

Iv got a 262xp that was bought brand new around then..only saw iv ever owned from the start ! You have got me thinking…must look it over to see what i have.

Yes, you should!

 

[Simondo]

That seldom is the case with any brand. The models change with time (product development), and sometimes with part logistics etc. as well....


Yes, you should!

Evening ST.
Will be done ..could you age it for me if i pop the numbers up?

 

[SawTroll]

Evening ST.
Will be done ..could you age it for me if i pop the numbers up?

I assume so.

 

[Simondo]

I assume so.

2350431 262xp
Will inspect under the cases tomorrow .

 

[Tor R]

2350431 262xp
Will inspect under the cases tomorrow .

Simon, it may be the golden one, you know, KS cylinder & HdA 87 carburator.

 

[Toad22t]

2350431 262xp
Will inspect under the cases tomorrow .

Should be a 1992 built on the 35 week

 

[Simondo]

Should be a 1992 built on the 35 week

Cheers Toad ...

 

[Simondo]

Simon, it may be the golden one, you know, KS cylinder & HdA 87 carburator.

No de-comp…kicks like a mule if you don't pull it hard..sounding like what you wanted to hear Tor ??

 

[Toad22t]

Cheers Toad ...

Tor should be right that it could be a KS cylinder and hda 87 carb.

 

[Tor R]

No de-comp…kicks like a mule if you don't pull it hard..sounding like what you wanted to hear Tor ??

me think you have KS jug and HdA 87 carb.......
Flywheel side, cylinder base, you should see something like this, example:
01 91.
If so, it's one KS cylinder.

 

[rattler]

me think you have KS jug and HdA 87 carb.......

Sure do sound like it.

Sent from my XT1060 using Tapatalk

 

[Simondo]

me think you have KS jug and HdA 87 carb.......

This is new to me that there could be the "holly grail "of 262 xp s.
All folks with them iv come across think there a strong saw.

 

[Tor R]

This is new to me that there could be the "holly grail "of 262 xp s.
All folks with them iv come across think there a strong saw.

you bought it new, xpg, 90% chance you also have everything inside that every 262 fans dribbling after.........
Check carb, and check what I posted å bit earlier

 

[Tor R]

NOS 262 XPG 90, the one with orange start decal, is my wet dream hahaha

 

[Simondo]

you bought it new, xpg, 90% chance you also have everything inside that every 262 fans dribbling after.........
Check carb, and check what I posted å bit earlier

Its only needed to be maintained as its had a moderate amount of use …its the one in the pic on this thread with the 254. All parts are what came with the saw. I will have a good dig about tomorrow and take some pics. Is it the KS jug and HDA 87 combo that make it sought after ?

 

[Simondo]

NOS 262 XPG 90, the one with orange start decal, is my wet dream hahaha

There speaks a True collector

 

[Tor R]

Is it the KS jug and HDA 87 combo that make it sought after

Yes, thats the combo most wants to have.
You can be able to verify if it's KS, flywheel side, foot of the cylinder, there is two rings with two numbers in each spot.

 

[ajschainsaws]

This is new to me that there could be the "holly grail "of 262 xp s.
All folks with them iv come across think there a strong saw.

Hopefully you have the golden egg