Looking for Picco stuff.

[RI Chevy]

Sometimes Dave responds quicker to Email. He said he checks it more frequently than PMs.
Try his Email address

Sent from my SM-G930V using Tapatalk

 

[BrokenSVT]

Must be busy. Sometimes its a day through PM before I hear from him

And that's completely understandable. I hate to sound as if I'm in a huge hurry, but I kind of am. I'd love the chain and sprockets to arrive along with the saw instead of a couple weeks later. That 026 has work to do lol.

 

[BrokenSVT]

Sometimes Dave responds quicker to Email. He said he checks it more frequently than PMs.
Try his Email address

Sent from my SM-G930V using Tapatalk

I sent one yesterday.

 

[RI Chevy]

Lol. OK. He will respond.
After all he is only "Occassionally Helpful." LOL

Sent from my SM-G930V using Tapatalk

 

[Cut4fun]

When I did the 3/8lp chain build off round 2 was using this woods ported 026 and 12"

 

[Cut4fun]

picco work W and race R on the 026. Pine cants

 

[Definitive Dave]

sorry guys i'm tits deep in paperwork

ok if you have a stihl 026 clutch drum, the only pico rim available in Mini spline is the OEm stihl 7 pin here:
http://www.ebay.com/itm/OEM-Stihl-C...00-642-1240-New-MS260-026-READ-/322273936535?

if you have an oregon clutch drum that take the standard spline rims your options open up alot
http://www.ebay.com/itm/Stihl-Husqv...-034-pico-7-tooth-small-spline-/322076374121?

http://www.ebay.com/itm/Stihl-Husqv...-034-pico-8-tooth-small-spline-/222088378338?

keep in mind that these rims fit two ways so make sure everything is lined up properly for your saw/bar combo, also these sprockets tend to wear the drive links on a chain more than standard sprockets

Dave

 

[RI Chevy]

Real nice! @Cut4fun

Sent from my SM-G930V using Tapatalk

 

[Cut4fun]

Real nice! @Cut4fun

Sent from my SM-G930V using Tapatalk

Those were the winning 2 from the race and work classes.

 

[BrokenSVT]

Ok so it looks like I'm stuck searching for a NOS gem of an 8t hiding somewhere, or a used one from one of the collectors of chainsaw curios.

Damn. Gotta find a collector.

 

[Dub11]

sorry guys i'm tits deep in paperwork

ok if you have a stihl 026 clutch drum, the only pico rim available in Mini spline is the OEm stihl 7 pin here:
http://www.ebay.com/itm/OEM-Stihl-C...00-642-1240-New-MS260-026-READ-/322273936535?

if you have an oregon clutch drum that take the standard spline rims your options open up alot
http://www.ebay.com/itm/Stihl-Husqv...-034-pico-7-tooth-small-spline-/322076374121?

http://www.ebay.com/itm/Stihl-Husqv...-034-pico-8-tooth-small-spline-/222088378338?

keep in mind that these rims fit two ways so make sure everything is lined up properly for your saw/bar combo, also these sprockets tend to wear the drive links on a chain more than standard sprockets

Dave

Is that Oregon drum still available?

 

[Cut4fun]

Will this work for a 7? $5 https://www.hlsproparts.com/Rim-sprocket-3-8-pitch-7-tooth-mini-7-spline-p/35-7s7.htm

http://www.ebay.com/itm/OEM-Stihl-C...7-3-8LP-Picco-7T-0000-642-1240-/322767500608?

 

[BrokenSVT]

I picked up an OEM Stihl 7t for $7 shipped on the 'Bay. I have the correct bar coming with the saw from Al.

Now to get chains built and track down this 8t...

The8t was made by mother Stihl, then discontinued (NLA). I have one that I bought at the end of production, and it makes mysaws feel boggy

Maybe @Duane(Pa) will sell his

 

[Duane(Pa)]

I picked up an OEM Stihl 7t for $7 shipped on the 'Bay. I have the correct bar coming with the saw from Al.

Now to get chains built and track down this 8t...



Maybe @Duane(Pa) will sell his

It's the classic unobtainium scenario. It happens in every hobby/pursuit I have ever been involved with. I'm just saying don't loose any sleep over the P8 rim. The 7 doesn't suck. Deets is right the only larger diameter (stock) rim I have ever seen is .325 x 9

 

[Duane(Pa)]

If eyes ewe, I'd get @Icepick69 to square up some PS and send it your way. All my Picco is round, but square chain is where it's at...

 

[Ryan Browne]

I picked up an OEM Stihl 7t for $7 shipped on the 'Bay. I have the correct bar coming with the saw from Al.

Now to get chains built and track down this 8t...



Maybe @Duane(Pa) will sell his

If eyes ewe, I'd get @Icepick69 to square up some PS and send it your way. All my Picco is round, but square chain is where it's at...

That right there is some top shelf deflection. "This is not the sprocket you're looking for..."

 

[concretegrazer]

I didn't start the thread to debate or to be talked out of anything. I know what I want. I've just not been able to track it down yet.

What exactly are you after? A limbing setup or go fast play? If'n the latter go true 3/8.

 

[BrokenSVT]

What exactly are you after? A limbing setup or go fast play? If'n the latter go true 3/8.

I'm looking for "not advice on my setup" lol.

 

[Cracker Boy]

Ok so it looks like I'm stuck searching for a NOS gem of an 8t hiding somewhere, or a used one from one of the collectors of chainsaw curios.

Damn. Gotta find a collector.

Good luck 8t is not available in us have to go 7p allready been that route

 

[BrokenSVT]

Good luck 8t is not available in us have to go 7p allready been that route

They exist. I'll find one.