Looking for Picco stuff.

[Cracker Boy]

@Icepick69. Will set you up its picco 3/8 ps he can also square grind it only true bar i know of to run it us cannon super mini s1 mount you will need 66 drive links for an 18 in bar on a p7 rim thats what i run on my 026 its a great setup if you do find a p8 you will need 67 links hope this helps.its the best picco chain there is i also run it on my 020t i velieve its 50 link not sure on that one.

 

[Cracker Boy]

He is also a cannon dealer and can set you up its a ps bar shop

 

[Cracker Boy]

They exist. I'll find one.

Ok let me know when you do find 2

 

[BrokenSVT]

I've got a 16" closed mount Stihl bar coming. Requires 60dl. I'm open to ordering chain from whoever can get it to me before Friday.

 

[Cracker Boy]

I've got a 16" closed mount Stihl bar coming. Requires 60dl. I'm open to ordering chain from whoever can get it to me before Friday.

View attachment 89991

@Icepick69

 

[Cracker Boy]

Ok let me know when you do find 2

You might be able to get a densco but would have to buy oregon drum chrck them out

 

[BrokenSVT]

You might be able to get a densco but would have to buy oregon drum chrck them out

I saw those after ordering the OEM Stihl rim. I'm still open to whatever, but those $35 rim sprockets are nuts.

 

[Cracker Boy]

Thats why i aint got one

 

[Deets066]

I saw those after ordering the OEM Stihl rim. I'm still open to whatever, but those $35 rim sprockets are nuts.

That's about the only route I know of,

If I remember right I've paid $45-$50 for my 404-10

 

[concretegrazer]

I'm looking for "not advice on my setup" lol.

I hear ya. I'm sure it'll be good enough for who it's for.

 

[Deets066]

I hear ya. I'm sure it'll be good enough for who it's for.

Shots fired!

 

[Cracker Boy]

Boom shocka locka boom shocka locka

 

[Cracker Boy]

Is that Oregon drum still available?

Yes its same diameter as stihl drum but the splines are diff for the densco rim i had one i let it go with an oregon .325 rim stihl rim wont fit oregon drum

 

[Cracker Boy]

Yes its same diameter as stihl drum but the splines are diff for the densco rim i had one i let it go with an oregon .325 rim stihl rim wont fit oregon drum

Is that Oregon drum still available?

Yes its small spline oregon drum 7 spline but you have to buy danzco rims or oregon rims stihl rims dont fit spines are diff spacing

 

[Dub11]

Yes its small spline oregon drum 7 spline but you have to buy danzco rims or oregon rims stihl rims dont fit spines are diff spacing

Ok thanks

But still confused by this. Any part numbers?

 

[Cracker Boy]

You looking for stihl right

 

[Cracker Boy]

Part number 100791 oregon then here is danzco 8 rim sprocket for that drum in picco to run 8 tooth in picco you will need 67 links on an 18 in picco bar might have to mod clutch cover some cannon super mini is what i run on my 026 hope it helps @Dub11

 

[Dub11]

You looking for stihl right

Part number 100791 oregon View attachment 90025then here is danzco 8 rim sprocket for that drum in picco to run 8 tooth in picco you will need 67 links on an 18 in picco bar might have to mod clutch cover some cannon super mini is what i run on my 026 hope it helps @Dub11

Yup 026 MOFO. and thanks for the Oregon number. I'm trying to run my circus from me phone.

 

[Cracker Boy]

There is a 9 and 10 pin on thebay to dave has remember for every rim size after 7 to add 1 drivelink icepick can make your chain and square frind it its bad azz chit

 

[Dub11]

There is a 9 and 10 pin on thebay to dave has remember for every rim size after 7 to add 1 drivelink icepick can make your chain and square frind it its bad azz chit

Oh I know I got some of Icepick chain!