Little bit of this and a little bit of that...

[Chainsaw Jim]

Time for a reed block!

 

[Red97]

Time for a reed block!

Possibly

 

[Chainsaw Jim]

The four sided pyramid type from old Homelite saws might be a good simple design to check out.

 

[Frank bierce]

Awesome thread!! Very neat and unique setup. Hopefully you’ll come up with something that does not prove too difficult.

 

[Red97]

The four sided pyramid type from old Homelite saws might be a good simple design to check out. View attachment 101419

I have a couple of those, and even held one up at one point lol

Sent from my SM-G950U using Tapatalk

 

[Lightning Performance]

045 056 boot?

 

[Red97]

@hseII ...

 

[hseII]

@hseII ...

The Homelite 4 side, a WB or WJ, & you are but a Green weenie away from Making an ECHO relative to the Big woods again.

Come On!!

 

[Red97]

The Homelite 4 side, a WB or WJ, & you are but a Green weenie away from Making an ECHO relative to the Big woods again.

Come On!!

Probably have to find a 394 jug to bolt the reed block too....

 

[psuiewalsh]

Didn't someone weld a block around the intake and machine it out? @srcarr52 @Chainsaw Jim

 

[srcarr52]

Didn't someone weld a block around the intake and machine it out? @srcarr52 @Chainsaw Jim

I've welded on many intakes blocks, or welded around the stock one to make it bigger.

 

[Lightning Performance]

I've welded on many intakes blocks, or welded around the stock one to make it bigger.

You think it's worth the time to reed block a ms361?

 

[srcarr52]

You think it's worth the time to reed block a ms361?

No.

 

[Redfin]

I've welded on many intakes blocks, or welded around the stock one to make it bigger.

Any issue with the plating after?

 

[srcarr52]

Any issue with the plating after?

Only on AM cylinders.

 

[EvilRoySlade]

Only on AM cylinders.

You also use the mandrel in the bore, which I believe is a huge help. Just wanted to remind others about that extra step in setup.

 

[srcarr52]

You also use the mandrel in the bore, which I believe is a huge help. Just wanted to remind others about that extra step in setup.

Don't give away all my secrets!

Also welding little bits at a time helps.

 

[EvilRoySlade]

Well sheet, I guess it’s good I didn’t slip and tell everyone you make the mandrel outa wood then. That was close. The secrets in the details.

Don't give away all my secrets!

Also welding little bits at a time helps.

 

[Redfin]

Find me a big chunk of copper, Rod.

 

[hseII]

Find me a big chunk of copper, Rod.

Nephew,

Am I going to see youins next weekend?