HUSQVARNA HUSQVARNA THREAD

[jacktheripper]

Filter upgrade for the 266XS , View attachment 456657View attachment 456658View attachment 456659

What a dream saw

 

[Squareground3691]

What a dream saw

Thanks, a favorite cord wood saw .

 

[RCBS]

Gents, I have 'opportunity' to take possesion of a somewhat whooped on 543xp. It's rough and not making much air. Ex side of piston looks fine but I'm only seeing ~50lbs on the guage. It's got a broken flag, bent handle and the on off switch is wonky. Does make spark. No joy with some gas down the plug hole.

Is it worth any time/money to try to revive one? It's free to me.

 

[hacskaroly]

Is it worth any time/money to try to revive one? It's free to me.

I found a Husky 136 at the dump missing the clutch cover, recoil and has a scored piston and possibly some scoring on the cylinder, but found it worthy to bring home and revive. I figured if anything it could be the "loner" saw when someone comes and asks to borrow one!

 

[hacskaroly]

Got a family picture of the all of the Husqvarna's I have:

Front to back:
* 136 (dump find)
* 440 (well used store loaner saw)
* 55 Rancher (dump find)
* 455 Rancher (customer returned to store - said "was a piece of junk")
* 272 XPG (dump find)
* 2100CD (dump find)

 

[Shane¹]

I found a Husky 136 at the dump missing the clutch cover, recoil and has a scored piston and possibly some scoring on the cylinder, but found it worthy to bring home and revive. I figured if anything it could be the "loner" saw when someone comes and asks to borrow one!

I probably have some parts for you if you get me a list or maybe you can have the whole box

 

[silveradol9h]

Got a family picture of the all of the Husqvarna's I have:

Front to back:
* 136 (dump find)
* 440 (well used store loaner saw)
* 55 Rancher (dump find)
* 455 Rancher (customer returned to store - said "was a piece of junk")
* 272 XPG (dump find)
* 2100CD (dump find)

View attachment 461160

I'm going to the wrong damn landfill...

 

[hacskaroly]

I'm going to the wrong damn landfill...

That list didn't include the 046 or the plethora of Wildthings that were there too!!

 

[RCBS]

Gents, I have 'opportunity' to take possesion of a somewhat whooped on 543xp. It's rough and not making much air. Ex side of piston looks fine but I'm only seeing ~50lbs on the guage. It's got a broken flag, bent handle and the on off switch is wonky. Does make spark. No joy with some gas down the plug hole.

Is it worth any time/money to try to revive one? It's free to me.

Further teardown revealed a broken case at the flywheel side where flag attaches. No go. It was either dropped from a bucket, or run over.