Husqvarna 350 intake adapter removal

[bigfrank]

If you dont change that boot and clamp at some point it will eat itself and you wished you had changed it.

I did change it. Didn't make any difference in the problem I am having, but the boot is much tighter.

 

[Husky268]

Been a while since working on these but like huskihl said those bolts get loose and getting them back tight really wont work u need to tear down and reseal.Also check cyl to base where impulse is created sometimes u need to grind a little but really look over closely and i guess you put new impulse line on.just about has to be in bottom end.

 

[9050lx]

The little plastic nipple on the intake boot that goes into the cylinder can get hot and melt closed.

 

[backhoelover]

Did you rotate the crank while doing pressure and vac test?

 

[JohnnyBlade]

Im guessing its in the carb. Carb kit and a cleaning. Sounds like everything else checks out

 

[9050lx]

Check the order of gaskets in the carb.Common issue.How bad are the rings?Do they have any tension?

 

[huskihl]

I don’t believe the OP is around any longer

 

[Wolverine]

I don’t believe the OP is around any longer

Last visit Feb. 2 2020.

 

[huskihl]

Last visit Feb. 2 2020.

Yep. I think he got the Ironboot

 

[Wolverine]

Ah, dammit. It's just a garden too for cristsakes.