how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[WKEND LUMBERJAK]

I forget the road#..
Sorta right in town..

If it's the same one its I 35

 

[cobey]

Hi all,i started a saw yesterday , yay

 

[Hedgerow]

If it's the same one its I 35

This one IIRC..

 

[Hedgerow]

Guess I could have put it in the honey locust I knocked down yesterday.



Thanks for the speedy shipping Steve!

I'll loosen it up tonight on the new bar. Before it ever sees wood.

Speaking of which, Husky bars have gotten stupid expensive!
I cringed a little when the guy told me how much it was gonna be..

 

[67L36Driver]

I got three bars Monday for $15. Used and abused of course.

Dressed two, a 3/8” x .063” x 20” ES and a .325” x .063” x 18” generic.

Third one good to go. 3/8” x .050” x 18” Forester.

Shot the Stihl bar shortage here in the head. [emoji106]

 

[Semotony]

Found a tree cut all kinda wrong lengths in the yard waste dump, so headed back to the ranch for the van, took the 046 from the trunk fired first pull after sitting in that trunk for a few ,weeks started on 3rd, so filled fluids and took the van to the dump
Having an 18" bar on helps even em out. Once it was unloaded took the car back (saw in trunk) to get a pic of saw on the various drops & chips. Frontloader was pushing/stacking it into a pile. TG Blessed w/timing. Know someone will point out loop is loose! Only because the bar is on upside down ya no. Put it on right side up & the loop snugs right up
What part of wapepella is the GTG?
Raining again now lightly, later

 

[Hedgerow]

I got three bars Monday for $15. Used and abused of course.

Dressed two, a 3/8” x .063” x 20” ES and a .325” x .063” x 18” generic.

Third one good to go. 3/8” x .050” x 18” Forester.

Shot the Stihl bar shortage here in the head. [emoji106]

1-16" bar.
3/8 pitch .050 driver

$68.00

 

[Workshop]

Yep.
$20 per class.
Cold start
Required equipment:
Chaps, ear plugs, safety glasses

Your 390 would be suited for the "Over 5 cube gas" and Over 5 cube alternative fuel.

Cold start? As in engine stone cold, start with choke?

 

[67L36Driver]

1-16" bar.
3/8 pitch .050 driver

$68.00

A 16” Stihl or Husky mount bar from Jeff is about $25-30. W/loop of Carlton full chisel.

.325” x 18” Stihl mount w/loop is $32.50.

The .325” x 20” I bought for the 026 from Menards was $45 out the door. Crummy loop of semi on it.[emoji90] Farm Boss special. [emoji57]

But, it was Sunday and I wanted to play. [emoji849]

 

[WKEND LUMBERJAK]

A 16” Stihl or Husky mount bar from Jeff is about $25-30. W/loop of Carlton full chisel.

.325” x 18” Stihl mount w/loop is $32.50.

The .325” x 20” I bought for the 026 from Menards was $45 out the door. Crummy loop of semi on it.[emoji90] Farm Boss special. [emoji57]

But, it was Sunday and I wanted to play. [emoji849]

You need to start being more thrifty with the money us working stiffs are sending you retired guys.

 

[67L36Driver]

You need to start being more thrifty with the money us working stiffs are sending you retired guys.

Would I spend $68 for a 16” bar like Matt?

Hell no!

Bought one 16” from Baileys near eight years ago. [emoji33]. Never happen again.

I learn quick.

 

[WKEND LUMBERJAK]

Would I spend $68 for a 16” bar like Matt?

Hell no!

Bought one 16” from Baileys near eight years ago. [emoji33]. Never happen again.

I learn quick.

HAHAHA

 

[Dub11]

I'll loosen it up tonight on the new bar. Before it ever sees wood.

Speaking of which, Husky bars have gotten stupid expensive!
I cringed a little when the guy told me how much it was gonna be..

1-16" bar.
3/8 pitch .050 driver

$68.00

Should of got one of these.

 

[Workshop]

Made a 16" bar fit with a little custom work from Nick the Grinder.
Anybody got a chain? The one that's on it is hillbilly sharpened.

 

[MG2186]

1-16" bar.
3/8 pitch .050 driver

$68.00

You should of called, I know a good Oregon dealer.... lol!

 

[67L36Driver]

I can’t stand it! [emoji3517]

Unless I hear from stilshop123 by morning, I’m pulling parts from the Farmertec 360 to get the 036 in wood!!

Borrow parts, we will.

 

[Hedgerow]

You should of called, I know a good Oregon dealer.... lol!

I would have, but was over a barrel..

Had to have it today.

FWIW, it’s a damn good bar..
Replaceable tip and everything..

 

[Hedgerow]

I didn’t think they even made those any more..

 

[Dub11]

I didn’t think they even made those any more..

Who made what?

 

[Hedgerow]

Should of got one of these.
View attachment 172256

Got 2 of those in large mount husky..