how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Hedgerow]

Do you use an extra oiler or does it
Get enough with the pump?

Oils pretty good.
I always like to have more but it does a pretty good job.

 

[67L36Driver]

"If some is good, more is better and, too much is just enuff."

Morning midlanders!

 

[Hedgerow]

"If some is good, more is better and, too much is just enuff."

Morning midlanders!

Yup..
I want the oil tank empty when the gas tank is empty.
The Deere is close to that.

 

[67L36Driver]

'Do over' needed on my Farmertec 361. Acts like it is sucking air in the cut. I prolly rolled the PTO side crank seal when I put it together.[emoji21]

But I did sell the gray Craftsman 3.7".[emoji6]

 

[Ethan Hamby]

'Do over' needed on my Farmertec 361. Acts like it is sucking air in the cut. I prolly rolled the PTO side crank seal when I put it together.[emoji21]

But I did sell the gray Craftsman 3.7".[emoji6]

mine is in pieces still... Dealer needs to get my parts

 

[cobey]

Hi all I'm still waiting on a slow boat from overseas to bring parts for customer saws

 

[Ethan Hamby]

My handle to replace the broken one got here finally. I'm curious if it's broken to. Lol. Gonna find out after work

 

[Dub11]

hows everyone doing this afternoon. hopefully fantastic.

 

[lumberjackchef]

hows everyone doing this afternoon. hopefully fantastic.

Awesome! How bout you? Did a record heart transplant on a ms290 this afternoon. Started a complete teardown at 3:00 just did a test cut with the ole girl a few minutes ago to reset the carb...gotta port the muffler still as well!!!

Sent from my N9516 using Tapatalk

 

[Dub11]

Sick so no fun stuff for me. But good work on the 290 I have ms390 I need to put together but my garage has turned in to an ice box this time of year.

 

[Workshop]

Going to take this 290 back down to check things out. One thing I didn't do, and should have, is check the ring gap. Normally I don't bother because I get Caber rings and have never had a problem. These are not Cabers so I think that could be a problem. And check the rod to make sure the big end is not a problem. Looking through the exhaust the p/c still looks fine. Good thing I ran plenty of oil.

 

[Ethan Hamby]

New handle is 100%. Looked like they shipped me a damn ham tho lol

 

[Workshop]

New handle is 100%. Looked like they shipped me a damn ham tho lol

I wonder if it's a spiral cut ham?

 

[Ethan Hamby]

My question is why didn't they pack my $300 kit the way they packed this handle... Lol... It was covered in bubble wrap

 

[BrettL]

My newest addition to the madness. Great condition 032AV. Bought from the original owners son complete with non tattered or smudged owners manual. He wouldn't part with the case. I have several styles of older cases but the brake handle is too tall.

 

[Workshop]

My newest addition to the madness. Great condition 032AV. Bought from the primal owners son complete with non tattered or smudged owners manual. He wouldn't part with the case. I have several styles of older cases but the brake handle is too tall.View attachment 48012

Nice looker.
You Suck.

 

[Ethan Hamby]

It's really surprising to me that these huztl parts are glass fiber filled plastic... And super high like 70% that's usually where companies cheap out

 

[BrettL]

Nice looker.
You Suck.

Thanks. I've got to try to get the seller to part with the case. I've got one that looked identical to his but the brake handle is to high.

 

[Ethan Hamby]

Expensive lol hopefully my metering lever spring fixed the huztl carb and i don't have to order that one

 

[67L36Driver]

My newest addition to the madness. Great condition 032AV. Bought from the primal owners son complete with non tattered or smudged owners manual. He wouldn't part with the case. I have several styles of older cases but the brake handle is too tall.View attachment 48012

Be careful on them. I have an 032 money pit sitting here I can't get going.
That and a 048 made me swear off antique Stihls.

Too many NLA parts.