how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

I was lucky I had an ordinary Farm Boss carb left over or I wouldn't have discovered the difference.

 

[Ethan Hamby]

I was lucky I had an ordinary Farm Boss carb left over or I wouldn't have discovered the difference.

is it under the top side where the h and L screws are? Or the bottom where the impulse comes in. I'm guessing the top. I've got a lot to learn about carbs.

 

[Ethan Hamby]

I've taken 4 stroke carbs apart but only simple Briggs and Stratton ones

 

[Ethan Hamby]

It measures ~.5

 

[Hinerman]

Merry Christmas eve day to all my good friends. .....

Same to you brother.

 

[Workshop]

Been out in the shop working on the 41 this morning. It might actually make a saw after all. Thankfully I have another little husky to pull miscellaneous bits and parts from. This may be the last of the box saws that I can make a saw from. The rest will be parts and pieces. Except, maybe, a Ryobi. Lots of stuff for them. If anybody needs stuff for a project, let me know what you need and I'll look. It would be best to tell me what model you have and what piece, then I'll have a better idea where to look. It appears everything is 50cc or under. Lots of carburetors.
Different brands I have.
Craftsman, Poulan, Solo, Stihl, Husqvarna, John Deere, Mcculloch and there may be others I'm not aware of too.

 

[Ethan Hamby]

Just gotta order this at the dealer and I'm home free. Maybe. Lol. Maybe I should get diaphragms to?

 

[hoskvarna]

Merry xmas and happy new year to all [emoji2]


Sent from Hoskvarna hills

 

[Ethan Hamby]

Merry Christmas guys

 

[67L36Driver]

Found the clutch shoe.

Spring and rim sprocket remain lost.

Note to self: Get out the ladder and check the roof.

 

[Hedgerow]

And the driving all over starts...

Christmas mile's..

 

[67L36Driver]

Been out in the shop working on the 41 this morning. It might actually make a saw after all. Thankfully I have another little husky to pull miscellaneous bits and parts from. This may be the last of the box saws that I can make a saw from. The rest will be parts and pieces. Except, maybe, a Ryobi. Lots of stuff for them. If anybody needs stuff for a project, let me know what you need and I'll look. It would be best to tell me what model you have and what piece, then I'll have a better idea where to look. It appears everything is 50cc or under. Lots of carburetors.
Different brands I have.
Craftsman, Poulan, Solo, Stihl, Husqvarna, John Deere, Mcculloch and there may be others I'm not aware of too.

We are perpetually short on PL/SL type Remington mufflers. [emoji6]

 

[67L36Driver]

And the driving all over starts...

Christmas mile's..

Hah! Townies rule!
Daughter is barely two blocks and St. Francis is eight.[emoji108]

Not going to midnight mass this year.[emoji22]

 

[Ethan Hamby]

I have to drive 30 miles tonight then back then again tomorrow for Christmas lol

 

[sawnami]

Hmmmm.
Looks like I just mulched a $5 bill. [emoji15]

Sent from my SM-N910V

 

[Workshop]

We are perpetually short on PL/SL type Remington mufflers. [emoji6]

Hmmm. No old stuff in this batch.

 

[Workshop]

Found the clutch shoe.

Spring and rim sprocket remain lost.

Note to self: Get out the ladder and check the roof.

Did the same a while ago. Thought I had the clutch on tight enough.
Nope! Saw was mounted in the work stand (Thanks Marc) dribbled some mix down the carb to test fire it. It fired all right. Revved up and the clutch hit the wall. Still missing one shoe. It's probably out around Pluto by now.
Put a ceramic type filter in it. Won't pull fuel up the line. Think I'll put a gauze type in, see if that helps.

 

[Ethan Hamby]

I'm gonna build a stand in the next couple weeks to mount using the bar studs. Should help alot

 

[Hedgerow]

Hah! Townies rule!
Daughter is barely two blocks and St. Francis is eight.[emoji108]

Not going to midnight mass this year.[emoji22]

True..

But last night at 10:30, I was test running a saw in my log pile....

Check/mate

Lol.

 

[Ethan Hamby]

So far got $70 to add to the chainsaw fund