how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Ethan Hamby]

And those saws will be pretty badass lol they're literally made of aftermarket parts for OEM saws. And the parts are good quality

 

[concretegrazer]

Morning coffee lovers.

I did a dealer search. The closest dealer to me is in Nixa, MO. Home of the Workshop.

Morning everybody.

Must be Nixa Hardware. Good place but have to watch sometimes. They can be very expensive.

The one & only... But at least there local.
Menards carries them as well.

 

[Homelite410]

I have no use for the decompression valve I will probably put a bolt in it. I'm gonna get a Stihl OEM tensioner also the huztl one is junk. Other than that they're pretty good parts. The ms390 cylinder kit I have sitting around is super nice from them

before you go badmouthing the decompression valve let's just remember by using it, you are easier on the starter, the Rope, and your shoulder. You aren't proving anything to anyone by not using the decomp. Sorry if that comes off a little abrasive.

 

[Ethan Hamby]

It also takes longer to start using the decomp

 

[Dub11]

before you go badmouthing the decompression valve let's just remember by using it, you are easier on the starter, the Rope, and your shoulder. You aren't proving anything to anyone by not using the decomp. Sorry if that comes off a little abrasive.

I had that happen to my poulan 3314

 

[Homelite410]

It also takes longer to start using the decomp

If that is the case then the saw is already low on compression.

 

[Louie B]

hot rod a Prius

LMAO
you just know some one has tried!!!!

 

[Workshop]

Yep. Pull out the triple A's and put in double A's.

 

[Douglas Ostrander]

With good compression you will like the decomp. With great compression you will want a D ring starter handle and a decomp.

 

[Douglas Ostrander]

I have found the best starter wood for a EPA stove is an old dried out 2x4. Non treated! Burns hot and quick. Very seasoned.

 

[Homelite410]

I have found the best starter wood for a EPA stove is an old dried out 2x4. Non treated! Burns hot and quick. Very seasoned.

Mmmmm I love kiln dried!

 

[Jetmd]

With good compression you will like the decomp. With great compression you will want a D ring starter handle and a decomp.

Yep, especially on a really cold day.

 

[Homelite410]

Yep, especially on a really cold day.

Yes, yes indeed!

And we need to teach @ramrat to short stroke the rope!

 

[Workshop]

Yep. 2x4 pieces and propane torch is what I use. Works the best.

 

[sunfish]

Pretty hard to hot rod a Prius... Lol.

My wife has a Prius, it will haul-ass stock, has two motors ya know.... Bet there's a forum with mods an stuff, like nuts that mod chainsaws. lol

 

[Homelite410]

LMAO
you just know some one has tried!!!!

I learned @wky gtg that you can hot rod a flashlight..... Candlepowerforum.com

 

[67L36Driver]

My wife has a Prius, it will haul-ass stock, has two motors ya know.... Bet there's a forum with mods an stuff, like nuts that mod chainsaws. lol

I almost never see a Prius in the right lane under 70.

How 'green' is that?

 

[Louie B]

I almost never see a Prius in the right lane under 70.

How 'green' is that?

Would be scared to go slow in a Prius

 

[cobey]

I almost never see a Prius in the right lane under 70.

How 'green' is that?

I hardly see anyone around there
Under 70.... kinda like nascar

 

[Workshop]

I almost never see a Prius in the right lane under 70.

How 'green' is that?

They're probably trying to get out of the way before Chet runs them over.